• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Ignition timing

  • Thread starter Thread starter tfb
  • Start date Start date
T

tfb

Guest
G'day all,

No doubt this might sound like a daft question to some, but bear with me, OK? :)

Right then, if I want to advance the ignition timing on my GS1000ST, which way do I turn the base plate -- clockwise or counterclockwise?

I ask because after using the highest octane fuel I can find at the bowser, it's still 'pinking' far too easily when I take off from the lights.

So I want to fiddle the ignition timing a little. But the question is, Clockwise or counter-clockwise?

Cheers,
Mike.
 
Counterclockwise to advance.
Clockwise to retard.
To stop your "pinking" you want to retard the timing, not advance it more.
The specified timing is for a stock engine in perfect condition, but it should work well enough for all but a highly modified engine.
Shouldn't need high octane unless it has higher than stock compression or operating in unusual conditions.
If it is doing this "pinking" with the timing set correctly, something else is wrong.
 
Last edited:
Cheers for that -- it's nice to have an answer. ;)
Since I made the post I decided I'd just take a punt, and turn the plate about 1 degree clockwise... which has markedly reduced the pinking.

My next question is, how far can the timing be safely advanced? Can I go another degree or two without any worries?

To give a bit more info., the engine's top end was rebuilt not that long ago, so it has excellent compression. At the same time, the carbies cleaned out and re-set (a previous owner had done a few, ah, 'innovative' things), balanced; and the valve clearances were all done to the widest tolerance recommended.
 
tkent02 said:
Counterclockwise to advance.
Clockwise to retard.
To stop your "pinking" you want to retard the timing, not advance it more.
Click to expand...

tfb said:
I decided I'd just take a punt, and turn the plate about 1 degree clockwise... which has markedly reduced the pinking.

My next question is, how far can the timing be safely advanced? Can I go another degree or two without any worries?
Click to expand...
As tkent mentioned, clockwise will retard your timing, not advance it. You retarded it and it seemed to improve, now you are asking how much more you can advance it? To my feelble little brain cell, it seems that you have already found the limit. Now, the question remains ... is this setting correct according to specs? Obviously it works, but it is best to check with a timing light, too.

.
 
A lean fuel mixture can contribute to engine knock as well so you might want to verify the mixture via some plug chops before messing with the ignition too much.
 
You retarded it and it seemed to improve, now you are asking how much more you can advance it? To my feelble little brain cell, it seems that you have already found the limit.
Click to expand...

Erm... ah... :oops: ... I *did* mean "retard" the timing... but somehow got it in my head about advancing it in the same direction, if you get my drift. Maybe not... but don't worry, it's me with the feeble brain cells here. :D

I meant to ask, then: how far can I safely retard the timing?

I don't think the mixture is lean, because (i) I have got the carbs set stock-standard for an engine that is stock-standard, apart from the 4-1 exhaust which isn't anything radical; and (ii) because I used an AFR meter on it after the rebuild and it indicated that things were running OK in the fueling dept.

Thanks for your patience, gents. Time I hit the hay...
 
You must log in or register to reply here.
Back
Top