• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Ignitor Unit removal...

  • Thread starter Thread starter BiggybWRX
  • Start date Start date
B

BiggybWRX

Guest
Hi all,

I have a 81 GS550T and have figured out through the use of the Clymer manual that my ignitor unit is bad. I believe i have located it under the airbox housing even though the Clymer manual calls out under the battery box. What is the best way to remove the unit? I have tried long screwdriver between rear fender and metal plate. I am thinking the carbs have to come out for me to be able to actually remove the airbox housing. The reason i want to remove it because after WD-40, etc the screws wont budge. With the whole thing out i would be able to apply enough torque to get her out. And i have tried searching but no luck on how to get it out. Thanks
 
still need help...

still need help...

Anybody...?

Come on, i read a whole bunch of posts with guys who have replaced them. I just need a little more info.
 
When i removed mine on my gs550, what i ended up doing was taking a electric drill, and drilling out the screws, in the bottom on the airbox... Standing above the bike, drilling down...Just remove the air filter element and you'll see them..

Then i just used two bolts i had in the garage to secure the unit back on.

I spent alomst an hour trying to get them out, and 30 seconds, drilling them out..

Good luck
 
I just got through drilling out those screws to get my ignitor out as well. Glad I'm not the only one who had to resort to that! I managed to get in there with a short stubby screwdriver after loosening the airbox and removing the battery and rear fender. But the screws were stuck pretty well and I couldn't get enough leverage to break 'em free.
 
You must log in or register to reply here.
Back
Top