• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

initial starting problem

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
I finally got my bike running. It has been a year and a half in the making, but I have got the finished product in working order. The only problem I am having is if the bike sits for a period long enough to allow the engine to cool, it does not want to start unless I push it. When the engine is warm I can bump the starter button once and it turns right over. I will soon change out the pilot jets and was thinking that could be some of the problem. Sometimes I can do a combination choke throttle to start it, this requires complete silence and I have to do a special dance in order to hit the sweet-spot. anyway, if anyone has the magic answer please tell me.

Regards,

Brent
 
Brent,
I experienced the same conditions on my 1100 and always believed it was the carbs, but amazingly after I got my charging system working correctly and a new battery it now starts perfectly hot or cold.
 
For good starting you need a good battery. I agree, whith a bad charging system, the battey has not enough power to feed the starting motor AND the ignition system.
I'd start checking the electrical connections of the coils and the battery ground. Corroded connections can be (part of) the problem.

Jojo
 
hard starting

hard starting

in one of the two manuals I have (clymers, and another one) when I was going thru the carb rebuild section there was a note about making sure the "start" passage in the float bowl was open. Otherwise the bike will start hard and idle stupid. I had the same problem with my 79 550E. Plan to go thru the float bowl circuits this weekend. One other thing! recheck your timing! I put new points, condensers, etc., in mine last fall and set the timing. This spring when the bike would start, it wouldn't exceed 60 MPH in 6th or 6000 RPM in any other gear. Everyone said it was carbs! When I finally decided to recheck the points settings (after several forays into carburetor land) I found the only thing it was running on was flooded cylinders and point bounce. I reset the point gap and timing and now 9500 RPM'S in 3rd gear gets me about 75 MPH with 3 more left to go! DON'T FORGET THE BASICS!
 
You must log in or register to reply here.

Similar threads

P
Starter cranking slowly
Replies
7
Views
121
adam83
adam83
MiahSlays6332
No Power/ No start. All Elec. Verified.
Replies
6
Views
161
argonsagas
argonsagas
C
Multiple (Carburetor?) Problems
Replies
16
Views
308
Steve
Steve
oldGSfan
Something hinky with GS1100E starter or starter clutch?
Replies
16
Views
315
oldGSfan
oldGSfan
DimitriT
Weak idle until hot
2
Replies
31
Views
568
DimitriT
DimitriT
Back
Top