• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

jetting for WV?

  • Thread starter Thread starter maro
  • Start date Start date
M

maro

Guest
I'll be going to the GS rally in West Virginia in a few weeks.

Right now my jetting is near perfect. A bit lean in the pilot. I've been meaning to increased the pilot one size, just been lazy about it.

Any suggestions of where I should have my jetting for the WV trip?
 
I don't understand the "need" to re-jet for a weekend trip. :-k

There is nothing "special" in WV that is worth re-jetting for.

Go. Ride. Enjoy. Don't worry about the bike.

.
 
steve,
you was kind with that reply.
wait till trippivot reads this post...
hehehhehe
 
Last edited:
Steve said:
I don't understand the "need" to re-jet for a weekend trip. :-k

There is nothing "special" in WV that is worth re-jetting for.

Go. Ride. Enjoy. Don't worry about the bike.

.
Click to expand...

Totally agree, Steve. I'm amazed how so many people in this forum stress out over nothing, rather than enjoy the riding.

If your bike runs fine in Philadelphia, it will run just as well in West Virginia. You'd think the elevations in WV are 10,000 feet plus. The highest point in West Virginia is less than 5,000 feet. Typical elevation on the roads we'll be on is anywhere from 1000 to 3500 feet. Nothing radical.

Nick Diaz
Middletown, MD
 
Steve said:
I don't understand the "need" to re-jet for a weekend trip. :-k

There is nothing "special" in WV that is worth re-jetting for.

Go. Ride. Enjoy. Don't worry about the bike.

.
Click to expand...


You guys are great... LOL

I was just making sure!! :D
 
blowerbike said:
steve,
you was kind with that reply.
wait till trippivot reads this post
Click to expand...
:oops:


I might be riding out to California later this year. I certainly don't plan on re-jetting the Wing to go through Colorado. :eek:

Actually, several years ago, my wife and I did ride to Durango, Colorado. I was on my fuel-injected Kawasaki Voyager 1300, she was on her '82 850L.
We had NO fuel-related problems on that trip, even though elevations approached 10,000 feet at times. The biggest problem with her bike was a blown ignitor as we were starting home, forcing us to get a U-Haul truck. Halfway across Kansas, my bike tossed a u-joint on the driveshaft, so we squeezed both bikes into the truck and continued home.
drive1.gif


.
 
I rode from maryland, to virginia, into west virginia and then to pennsylvania on Sunday and the bike rode fine. Just curious why you feel you would need to re-jet:confused:
 
almarconi said:
I rode from maryland, to virginia, into west virginia and then to pennsylvania on Sunday and the bike rode fine. Just curious why you feel you would need to re-jet:confused:
Click to expand...


For some reason I thought I read this was a good idea if you were running sea level elevation...maybe I thought the elevation was much higher in the WV mountains. I guess not.

FYI - I rode from golden to the sailda to breckenridge on a dirt bike a few weeks ago. Though I didn't re-jet, if we were spending at least a few days in the mountains, it wouldn't have been a bad idea. OF course the bike I was on only had one carb which makes things a tad bit easier. But a lot of those folks were jetting there bikes approriately when they got to the higher elevation.

BUT NOT TO WORRY YA"LL , I'll leave the jetting alone for WV:)
 
A few more questions for you, in parting:

How long have you been working on getting your current jetting "near perfect"? :-k

How many changes did you make along the way, feeling that it wasn't quite good enough yet? :-k

How long did you test it in each configuration before deciding that it wasn't quite right? :-k

And you wanted to stick in somebody's guess as to what you might need for a weekend ride? :eek:

Also keep in mind that as you go up in elevation and stay there, your jetting needs to be a bit leaner. If you re-jet for the altitude, then come back down to sea level, unless you change your jetting again, you will be too lean. Personally, I would rather have it running a bit rich for a couple of days than lean. One of the racers on the board might be able to tell you how much altitude affects jetting needs, but for overall street use, and short duration at that, no re-jetting is necessary.

.
 
maro, i live in southern wv. my 79 gs750l with stock jetting, rusty exhaust full of holes with an h-pipe that was 10% eaten away and long gone wadding; not to mention carbs that had not been dipped nor the o-rings changed for at least the 10 years the po had it, and the fact he had never synced the poor carbs ran great up and down and around these backwood country hills. given the condition of your bike all you have to worry about is having to much fun.lol.
 
WV has such a broad altitude range, I wouldnt mess with it Josh. *I* only moved my clip a half step leaner for our trip b/c i was already IN the carbs doing other things. For this upcoming trip, i wont change a thing. If you lived in high altitude, and stayed there regularly, it would be different. But its not worth the hastle, nor immensely effective just passing thru. You're good to go bud, unless you're silly rich to begin with...BTW, your risers will go out tomorrow...


TCK
 
theres a really steep hill down the road from me...
do i need to re-jet my CA77 before i attempt to climb this:confused:
 
Steve said:
Most of the time, "climbing" means going UP. :o

Blowerbike, you talkin' about Linden Avenue? :-k

Not sure a CA77 would make it up that hill. :D

.
Click to expand...
eh... way to take a completely sarcastic answer and pick it apart Steve...nice job :p
 
You must log in or register to reply here.
Back
Top