Looking for a carb rebuild kit for 82 Gs850g/ start button not working either

[Banabdelnabi]

I?m new to Suzuki?s this is my first one I just bought it. I have always been a Honda guy this is the largest cc bike I have owned as well and the start button doesn?t work but it will start through the starter solenoid if I use a screwdriver. Trying to see if anyone has had the same issue. Maybe a daily start button? Also I want to rebuild the carbs and if anyone can link me to a good kit to buy. I know this has been posted before but All the links on here I?ve searched in past forums don?t work anymore.
1982 gs850g

 

[Nessism]

Check my signature for a carb rebuild tutorial. Inside you will find a recommendation for the most popular carb kits.

Also check the Newbie Mistakes thread for a list of stuff to watch out for as you begin your GS journey!

 

[Banabdelnabi]

Check my signature for a carb rebuild tutorial. Inside you will find a recommendation for the most popular carb kits.

Also check the Newbie Mistakes thread for a list of stuff to watch out for as you begin your GS journey!

thank you so much this is exactly what I needed although I can?t find like a link or anything to where I can get a good kit it just list the carb parts needed. Do you have a list of links to good rebuild kits for the 32 mm carbs??

 

[Nessism]

thank you so much this is exactly what I needed although I can’t find like a link or anything to where I can get a good kit it just list the carb parts needed. Do you have a list of links to good rebuild kits for the 32 mm carbs??

Go back and read the tutorial and your question will be answered.

 

[Banabdelnabi]

Go back and read the tutorial and your question will be answered.

I have red the tutorial entirely no where does it give a link or where to get a decent rebuild kit. It just tell what parts are needed and a site to get o rings

 

[cowboyup3371]

It tells you right on page 10 in the blue line at the bottom - cycleorings.com kit

 

[Nessism]

I have red the tutorial entirely no where does it give a link or where to get a decent rebuild kit. It just tell what parts are needed and a site to get o rings

"The original Mikuni brass parts (jets, Materials float valve, etc) are very high quality. Reuse these parts unless damaged. Aftermarket “carb kits” are typically of lesser quality and the included jets are often generic and not specific to each bike model."