• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

My Stator survived ...I think

  • Thread starter Thread starter Paul Kelly
  • Start date Start date
P

Paul Kelly

Guest
This starts out with dead battery #1... genius that I am I decide that the battery supplied with the bike was a cheap chinese one so I replace it.

I bought a better quality battery and installed it. A short while later it too has no charge. Read the stator papers...verry helpful..good job guys.

I've got a meter but it is old and cheap..still works though. The battery was on a charger for 2 days and had full capacity when I checked the voltage (12v) running and not. I checked connectors..not pretty.

Wires going to the stator and hot..too hot to touch with the bike running ergo there is voltage from the stator so I assume that the regulator is at fault. I should mention that I've taken this shortcut (I know I shouldn't) because I'm under a lot of pressure at work and don't have much spare time for diagnostics. I do have a spare regulator with a white clip which came in a parts box with the bike which I have tested and am told is working. So I install it.

Here comes my question. It appears that the existing regulator was installed by the previous owner and he did not connect it in any way that made sense. After consulting my manual and a little guess work I have connected the new regulator using pin connectors to match up where possible with the harness on the bike. It works my battery is charging.

THERE IS ONE WIRE ON THE HARNESS WHICH DANGLES...WITH A MALE PIN...kind of like sun morn..its colour code is white with a green stripe..DOES ANYONE KNOW WHERE THIS GOES TO

Everything seems to run fine. Battery is charging at 13.5v and lights are nice and bright. Still I worry.
 
Cooking with electrons

Cooking with electrons

Hi Mr. Paul Kelly,

Does your regulator/rectifier unit have 5 wires or 6 wires?


Thank you for your indulgence,

BassCliff
 
Thanks for the quick reply

Thanks for the quick reply

the unit has 7 wires 3 white 1 green 1 red 1black 1brown

I'm in trouble aren't I?
 
Cooking with electrons

Cooking with electrons

Hi Mr. Paul Kelly,

No, you're not really in trouble, as long as the wires can be identified.

This thread talks about 7 wire r/r units.

For example, on a later model Honda 7 wire r/r unit you have the 3 wires (yellow) for the stator connection. The remaining wires are usually 2 grounds (green) and 2 hot (red) wires. But your colors are different than the later model Honda 7 wire units I've seen. I actually have one in reserve, but I haven't had to install it yet. One ground would go directly to the battery, and the other to a good frame ground or fuse box ground. One red wire would go into the hot wire in the harness. The other red wire can be connected directly to the battery through a fuse. But without knowing what colors do what on your r/r unit, I would only be guessing. Sorry I can't be of more help. Mr. duaneage is always good for a part that's been tested to work (unless he's out of stock :rolleyes: ).

Thank you for your indulgence,

BassCliff
 
If the bike is after 80 than one of the stator wires goes into the light switch and back. It has no real purpose because it just routes back. It is for the earlier light on/off switches.
No need for it.
 
Thanks for the help

Thanks for the help

even though I have a loose wire not connected to anything all is working ok. I'll chase it down when I have more time but thanks guys...good riding.
 
You must log in or register to reply here.
Back
Top