Need some help with Handle bars, mounting, throttle & possible control update.

[DrDankNuggs]

When I bought my bike it has clip on bars that attach to the forks, I want to revert back to handle bars that mount to the top of the tree in picture 1 you can see what I guess I'm supposed to have on my bike however I do not where those risers are I just have empty holes. If I pull up the diagram to get part numbers all I see is what's in the picture. I believe I need somrisers I have found some on eBay I will include picture in following post for some reason it is only letting me upload one pic per post. Basically I want to upgrade my handle bars, throttle tube/grips. And if Anyone has a suggestion update the controls brake/clutch/switches but I'm primarily at this point just looking for solution to mounting a 7/8" handle bar to the triple.

 

[DrDankNuggs]

This is what I believe I need to mount the handle bars into the Tree, the one pictured is the wrong size but I would be looking for these just in 7/8"
As always I appreciate all the help you guys have given, and look forward to solving this weeks current issue.

 

[Grimly]

Be wary of simply bolting on risers, as the top yoke casting may be hollow and have no real strength where the holes are.
If it is a hollow casting I'd simply acquire a replacement top yoke from the breaker.

 

[DrDankNuggs]

Well it turns out, I apparently own a 1983 gs650gl, and on that year the handle bar mounts are definitely not molded into the upper as they were in the 82. It's all making a little more sense now Choke control didn't fit the upper tree looked different, did a VIN id and yeah the bike is an 83. Still interested in looking into new handle bars, I just need the mounts which are unfortunately looking to be a little pricy when buying OEM individual pieces, have yet to find all the pieces in one kit aside from the China special which at this point I'm somewhat leaning to.