• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

New Member!! stretched+lowered+raked=very excited!

  • Thread starter Thread starter jkrum87
  • Start date Start date
J

jkrum87

Guest
IMG_2126.jpgHello all. just wanted to stop in and say hello. picked up this 1980 gs1000 a couple weeks ago and wanted to share with everyone as well as get some information. it has msd, web cams, head work, pistons, stretched, raked, lowered, 190 rear tire, 530 chain conversion, frame is powder coated gloss black, fresh hunter green paint, the list goes on. im stoked. the thing is, i finally got her running after sitting for over 6 years in some ones garage uncompleted only to find out the motor is shot. second cylinder on the right side has a hole in the piston, dropped a valve, chewed up the spark plug bla bla no good news lol. so much for being a running motor like the seller told me. anyway, I found on craigslist, a 1979 gs1000, and a 1981 gsx1100 (looks like gs1100). i would like to know if the 1981 1100 motor will be a semi easy swap over or if i should go with the 1979 gs1000 parts bike. i believe a couple mounts will be different and the headers will work, but what about electrical and ignition and what not. im sure some one has done this swap before i just want to pick their brain a bit. any help will be appreciated. have pictures for days if anyone else enjoys them as much as me :)
 
Last edited:
Don't want to burst your bubble, if thats what you like, but throw handling out the window unless straight lines are what ur riding, I'd find a stock length swing arm and shocks and redo the back 1/2, use the parts bike for the frame and s/a swap your tins, part the "long" bike out, just say'in, it looks good but you won't be riding any twisties on that. :beguiled:
 
Looks like a safe and comfortable ride.

Have a look at the mega-welcome in my signature below, it will point you to service manuals and loads of other information on your bike.

The 1980 GS1000 is an 8-valve engine and the 1981 GS1100 is a 16-valve engine. They are almost completely different. I'm sure they would swap with some fabrication but the 1979 GS1000 is a better bet
 
lol howd u know that!? stand is off now btw, this is an older pic.
 
jbird7262 said:
Don't want to burst your bubble, if thats what you like, but throw handling out the window unless straight lines are what ur riding, I'd find a stock length swing arm and shocks and redo the back 1/2, use the parts bike for the frame and s/a swap your tins, part the "long" bike out, just say'in, it looks good but you won't be riding any twisties on that. :beguiled:
Click to expand...


thanks for the input i appreciate it, however this bike was not made to go through the twisties, it will be for the drag stip and maybe a possible ride through town from time to time. i bought the bike because it was long i deff am not going to make it short again haha:p
 
eil said:
Looks like a safe and comfortable ride.

Have a look at the mega-welcome in my signature below, it will point you to service manuals and loads of other information on your bike.

The 1980 GS1000 is an 8-valve engine and the 1981 GS1100 is a 16-valve engine. They are almost completely different. I'm sure they would swap with some fabrication but the 1979 GS1000 is a better bet
Click to expand...

i realize there are internal differences. but from the outside they look fairly similar. and i thought i remembered reading that the 1100 jugs will go on the 1000 bottom end. not to mention the gs1000 has 40k miles on it, and the gs1100 has like 2500, so i really dont wanna hear that the gs1000 is my better bet lol. i already assumed, just want to find someone with previous experience in doing the 1100 swap if possible. thanks for all the help and input it is greatly appreciated.
 
Not saying you can't drop in an 1100, just that it will be more work than the 1000. The 1100 is very popular in drag racing and we have a few builders here that will surely answer any and all questions you might have.
 
eil said:
Not saying you can't drop in an 1100, just that it will be more work than the 1000. The 1100 is very popular in drag racing and we have a few builders here that will surely answer any and all questions you might have.
Click to expand...

thanks, i have talked to a number of people on this forum already and they have all said it is a pretty straight forward swap. is this something you have tried before and had trouble with? from the information that i have gathered everything will swap over with the exception of a couple of mounts.
 
Make the swap to the 16 valve motor, you will never look back. The 8 valve motor is limited in what you can do to it, how big it will go & availability of hot rod parts.
Ray.
 
IMG_2323.jpgok so i purchased a 1981 gs1100x today. i swapped the motor over to my 1980 gs1000 but i am haveing some problems. what mounts dont line up? cuz it appears that im have ing problems with a bunch of mounts lining up. im close, but not there yet. the front two and the bottom two mounts seem to be off. also this electral peice that screws in with two screws behind the sprocket. what is it? i guess i have to swap over the entire harness from the 1100 to the 1000?
 
I have a 1982 gs1100glz shaft drive that I am modifying and had the swing arm and drive shaft extended out by 10". I will be making the bike into a single seat, springer type with several other design modifications. I have 2 of these bikes, and the one pictured is not subject to the modifications, I only placed the extended swingarm beside it for photo and comparison. SWINGARM SIDE.JPG
 
jkrum87 said:
View attachment 42262ok so i purchased a 1981 gs1100x today. i swapped the motor over to my 1980 gs1000 but i am haveing some problems. what mounts dont line up? cuz it appears that im have ing problems with a bunch of mounts lining up. im close, but not there yet. the front two and the bottom two mounts seem to be off. also this electral peice that screws in with two screws behind the sprocket. what is it? i guess i have to swap over the entire harness from the 1100 to the 1000?
Click to expand...


Looks like the sending unit for the gear shift indicator.

V
 
jermee47 said:
I have a 1982 gs1100glz shaft drive that I am modifying and had the swing arm and drive shaft extended out by 10". I will be making the bike into a single seat, springer type with several other design modifications. I have 2 of these bikes, and the one pictured is not subject to the modifications, I only placed the extended swingarm beside it for photo and comparison. View attachment 42477
Click to expand...

that looks like a fun little toy. any build threads i could follow along to?
 
You must log in or register to reply here.

Similar threads

G
1982 GS1000 Z US Version
Replies
10
Views
183
slayer61
slayer61
F
Re-inroduce myself
Replies
9
Views
125
Rob S.
Rob S.
acr88_
New Member From Los Angeles, GS750 Restoration
Replies
6
Views
138
salty_monk
salty_monk
G
New member with first Suzuki
Replies
7
Views
136
Grimly
Grimly
E
'83 1100E assorted newbie questions - what am I dealing with?
Replies
9
Views
126
eldevigo
E
Back
Top