J
Johnny K
Guest
I installed the Duneage R/R yesterday and cleaned all connections hooked up everything right. Made sure every connector worked by "stabbing" the wire just enough to dig into the wire to hear a beep. I did that with each prong from the voltmeter to each wire to make sure I had a good connection. Every test had a beep when I tested each pair that were connected. My battery measured 12.4 volts. I turned the key to the "on" position and nothing happened. No lights, nothing worked. As if I had a dead battery. Just really weird because I did hook up the green wire to the neg terminal where the other one was. The red to red wire, and the 3 yellow wires to the other 3 wires that were mulitcolored. And the sense wires to the battery switch wires. Not a clue guys...