M
Meriban
Guest
After putting the bike back together last week and it not running, I could get it to sputter. I took the carbs off and did a complete overhaul and double checked the valve shims, #3 exhaust was at 10 mm so I had to get me a bigger shim, now they are all within spec...So the carbs are perfect and valves and Electrical? The electrical has to be good, I put new coils on and new wires and new boots...So, I go to start it and same bloody thing, sputtering...So, I pulled the bike back into the garage and closed the door, took out the spark plugs, grounded them, then I noticed that one coil is not working...Could one be bad, new? Should I go back to the old coils/original?