U
UKPR1
Guest
I picked up this bike last week in exchange for an old computer I had laying around. The guy who had the bike said it ran with a temp gas tank. The wiring in the harness had been exposed everywhere and was a complete rat's nest. I love a challenge though and decided to take this one on. I have a replacement harness on the way but there are lots of ground wires that are cut for some reason. I want to essentially build the bike back to a running state prior to any mods. I will do so with the improvements recommended by this site, including the stator mod, dedicated frame ground, etc. I've restored a 77 MGB and a 74 TR6 before so while not an expert, I'm OK with electrical issues. I find myself with a box of parts that I have to attempt to find a home for, back on the 650 frame and therein lies my first question. The manual says to swing away the battery box and the mounting bracket is right there, but as I sit with the bracket in my hands looking to where to mount it - there seems to be nothing to bolt it up so. Are there tabs behind the battery box that are supposed to be there?
Soooo....if someone has a picture of this R/R ignitor bracket mounted in their bike, I would greatly appreciate seeing it. I pics in the manual are confusing at best. They show great close ups of this bracket, but not where the darn thing is mounted.
Thanks in advance,
Geoff
Soooo....if someone has a picture of this R/R ignitor bracket mounted in their bike, I would greatly appreciate seeing it. I pics in the manual are confusing at best. They show great close ups of this bracket, but not where the darn thing is mounted.
Thanks in advance,
Geoff

