• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Problem w/ Sticky Ignition Key

  • Thread starter Thread starter PaulC
  • Start date Start date
P

PaulC

Guest
I just got an '82 850GL with 17k miles. Soon after I got it the problem started where I could insert the ignition key but it wouldn't turn (I am pushing in/down on the key before turning.). I took the ignition off, dosed it with WD-40 but it would only turn freely maybe once out of twenty tries, and then turn freely for several times before it would lock up again. It really is random if it's going to turn. So I took the lock out of the iginition assembly and for several weeks have been using a screwdriver to start and stop. Then I found a used ignition assembly on ebay and it behaves the same way.

I've searched the forums but haven't seen this problem addressed. Can anyone shed light on a fix?

Thanks.
 
Graphite

Graphite

PaulC said:
II took the ignition off, dosed it with WD-40 but it would only turn freely maybe once out of twenty tries, and then turn freely for several times before it would lock up again.
Click to expand...


I've never had a problem on the bike, but have on various other locks (vehicles, doors, etc...)
Try a Graphite Lube. Should be available from most any auto supply store (Napa, Checker, Pep Boys...). I personalkly like the *dry* type. Comes in a small tube, just insert the nozzle into the keyway "flapper", give it a squirt, and try it. Depending on how gummed up the cylinder is you may have to do the above a couple of times. Also, before you use the graphite, you may want to try cleaning out the cylinder with brake or carb cleaner (spray into the flapper and let dry, or blow with air). The problem with the WD is that it will actually attract dirt and gunk, and you'll have the problems you're describing. Also, be careful with the key right after you try the graphite. The first few times it comes out of the cylinder it will have graphite on it and make a mess if you just stick it in your pants. Should be good-to-go. Good Luck!!!

Scott
 
Are you sure your fork-lock tab isn't dragging? Worst-case scenario, you can take your switch to a locksmith and he'll clean it and can even re-key it to where it will match your gas cap, seat lock, etc.
 
I have the lock out of the ignition assembly and it's still sticking. I got the new "used" lock to move between Off and Start, but once I move either way to lock it stays locked.

So what I've decided to do is grind the tab off the lock that keeps it from spinning in the assembly, epoxy a cover onto the lock and use that as a large key.

Will still try and get the new "used" one to lock.

Thanks.
 
You must log in or register to reply here.
Back
Top