• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

single air filters and cut exhuast jetting

  • Thread starter Thread starter newschoolgs
  • Start date Start date
N

newschoolgs

Guest
new to this site and to the world of cruisers i wanted to do my own thing with my bike and bob it out. The airbox was shot so switched it over to single pods and the exhuast was jacked up so cut it to stiaght pipe bike obv. runs to lean what jetting and any tips?
 
Hi Mr. newschoolgs,

A search of the forum would reveal the common wisdom. If you're looking for a 'plug-n-play' solution, get a Dynojet Stage 3 kit. If you're doing it manually, go up 4 to 6 sizes on the mains, one size on the pilot, shim the needles to try and richen up the middle. But the Dynojet kit has the specially tapered needles for the midrange. Read your plugs using the plug chop method and adjust as necessary to make sure you have it jetted right.

Now let me dump a TON if information on you and share some GS lovin'. :D

I just stopped by to welcome you to the forum in my own, special way.
big_hi.gif


If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
hat1.gif


Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...

carpet.jpg


Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike! :D

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff
 
newschoolgs said:
new to this site and to the world of cruisers i wanted to do my own thing with my bike and bob it out. The airbox was shot so switched it over to single pods and the exhuast was jacked up so cut it to stiaght pipe bike obv. runs to lean what jetting and any tips?
Click to expand...
How did it run before you started cutting? you should have made run good before modifing because now you have no base line to start from, Jetting who knows now?might try 3-4 sizes bigger to start might give you something to work with, maybe.
 
Before i started i cleaned out the carbs and it ran pretty decent a little cold blooded but overall not bad.
 
any progress with this problem yet im havin an issue with a similar setup although i thoink im workin with some strange vm carbs that dont belong
 
uglyripper said:
any progress with this problem yet im havin an issue with a similar setup although i thoink im workin with some strange vm carbs that dont belong
Click to expand...


I suggest you start your own thread.
Dont forget to tell folks what kinda bike you're working on.
 
You must log in or register to reply here.
Back
Top