G
Good Times
Guest
Ok, so I decided to tear into the problem of no meter lights or tail light on my bike. Brake light works. No tail or running light. Meter (Running) lights in the gauges don't work either. That was redundant.
I checked all the connections I could find and they all seem to be ok. Brown wire runs the tail light, grey wire powers the meter lights. I used a test light to check the brown and grey wires at the connector coming out of the ignition switch.
Here's what I found:
Tested the red and orange wire. Test light comes on.
Tested the brown and grey wire. No test light.
So is it my ignition switch?
Thoughts? Solutions?
Edit: I'm thinking about jumping the brown and grey wires off of the orange wire on the ignition switch side of the harness. Anyone want to talk me down from the ledge? Think this would work?
I checked all the connections I could find and they all seem to be ok. Brown wire runs the tail light, grey wire powers the meter lights. I used a test light to check the brown and grey wires at the connector coming out of the ignition switch.
Here's what I found:
Tested the red and orange wire. Test light comes on.
Tested the brown and grey wire. No test light.
So is it my ignition switch?
Thoughts? Solutions?
Edit: I'm thinking about jumping the brown and grey wires off of the orange wire on the ignition switch side of the harness. Anyone want to talk me down from the ledge? Think this would work?
Last edited: