• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

To air or not to air in the front forks?

  • Thread starter Thread starter 80gs1000e
  • Start date Start date
I've run the max air pressure (17lbs.)in the forks on my 850 for 14 years, and have never had a seal go bad. I run the maximimum in my Honda xr650 (6 lbs). I weigh 250 lbs, and the forks are way too soft otherwise. Air in the forks does make them less responsive, but really helps cut down on forward brake dive. In my experience, forks that do not have air adjustability, come set up much firmer than the ones that do.
 
I'd do what the other guys say and set up the stiffness etc... without using air. As soon as I messed with the pressure on the forks (the guy who inspected it had the pump and probably didn't even put 5 psi in) the seal on one fork started leaking bad.
 
travellite said:
I'd do what the other guys say and set up the stiffness etc... without using air. As soon as I messed with the pressure on the forks (the guy who inspected it had the pump and probably didn't even put 5 psi in) the seal on one fork started leaking bad.
Click to expand...
No offense, but if you had a seal leak immediately with 5 lbs of air, the seal is bad in the first place. I have a Clymer manual that states categorically that air pressure, (to a degree of course), is actually beneficial to seal life. To each his own.
 
if your forks were originally equipped with air assist then you need to keep some air in them to help out your seals. they are designed so the air pressure helps them give a squeegy effect keeping the oil inside.
 
Bolder Biker said:
........Do you know if the "anti-friction" teflon-coated bushings have ever been replaced? There are 2 of them in each fork leg (upper/outer and lower/inner), and their function is to prevent friction between the 2 upper and lower parts of the fork as they slide past each other.........

BB
Click to expand...

I am confused and can't pinpoint which item you are talking about. Can you see them in this diagram?

SU0054_035.gif
 
If you use fork oil, it is supposed to resist foaming, like ATF. I wouldn't use engine oil mixed with anything. You will always have air in your forks, so the argument to not add pressure is pointless. Without the air your fork wouldn't compress as it would be full of oil. My bike is 21 years old with the original seals, has had between 15 and 20lbs in it all the time and hasn't wrecked the seals. I would definitely drain the old oil and stick in some new 15W fork oil. It will handle much better. When I changed mine, I did it twice. Changed out the old stuff, drove for a week and then drained it again. The oil cleaned out more accumulated crud. It is cheap, only $6 per bottle so the price shouldn't scare you off.
 
My 1150 85 model has both bushes you refer to , my 82 1100 Kat only has the lower split bush.
Btw you will also need to replace number 15 it is a nylon bush it goes on the damper rod.
Dink
 
Clone said:
........I did it twice. Changed out the old stuff, drove for a week and then drained it again. The oil cleaned out more accumulated crud. It is cheap, only $6 per bottle so the price shouldn't scare you off.....
Click to expand...

Good idea. Thanks.


Dink said:
you will also need to replace number 15 it is a nylon bush it goes on the damper rod.
Dink
Click to expand...

When I take them apart, I'll check that out. Any questionable pieces will get swapped out for new. This bike had sat outside for a few years at least before I got it. I lost the auction for the fork pump but I have my eye on another one.
 
You must log in or register to reply here.
Back
Top