• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Tyre Questions

  • Thread starter Thread starter Ricko19
  • Start date Start date
R

Ricko19

Guest
I know there have been a lot of threads on tyres and I have read a good many of them:-k There have been some good recommendations re brands which I will be looking into, but I would still like to ask a couple of quick questions re tyre sizing and pressures:

Re transcribing the old tyre code values - My manual says my bike (GSX750ET 1980) should have the following tyre sizes:

Front : 3.25H19-4PR

Rear: 4.00H 18-4PR

You can get a width from this but how are you supposed to work out what profile you need?

my bike which I bought recently has the following mismatched tyres on it (and handles terribly) :

Front: Avon Super Venom 100/90 V19, DOT AT3F (W0200) date??

Rear: Pirelli Match MT08 130/80-18, DOT XEYD, X2AH, 3500

I'm not sure if these are the wrong sizes/profiles? I need to know what the correct size and profile is supposed to be? I was going to change the front at least because I think its dangerous the way it handles, but I gather if any of those numbers I quoted are the dates of manufacture, then I should probably replace both ASAP?

Also, the other threads have mentioned the recommended tyre pressures in your manual for the original fitment tyres(mine is 28F/32R) but I'm gathering that newer tryes need more pressure in them to perform properly? The last modern bike I had a few years ago used to run 36f and 42r, but I would have thought that this would be too high for these 'skinny' tyres that this bike takes?

I am just over 100kg, so would a good starting pressure be around 33psi front and rear, then use the hot/cold test?

This is the first older bike I will have had in a long time and the first I have had to replace tyres for. Any help appreciated :)
 
Last edited:
Right tyre sizes i say. You could go smaller (90/90 and 120/80)on both and a smaller front would steer lighter, but personally ill stay that size. As for pressures ill be running 32/36 in them. But that me. And no-body say any crap about running them tubeless, THEY ARE NOT tubeless rims. Yes the 850's had a front tubeless but thats it.
 
The 750 here in the states uses a 2.15" wide rear wheel so the max tire width for that size should be 120 if you value handling above looks.

So for your bike I recommend a 100/90 front and 120/90 rear (assuming the rear wheel width is the same as here). Both of these sizes are larger than the stock tires but they are tried and true on your bike.
 
Opps didnt notice your a Qld boy. If thats the case give dave at Tyres for Bikes in Albion a call and pick his brain. I worked there for 17 yrs so im sure he is the right man to ask. 32624377 or http://www.tyres4bikes.com.au/
 
Thanks Sharpy - I'll give him a call during the week.

Thats Nessism :) Your post makes me even more confused with the widths though - I thought the 4.00 in the manual meant 4 inches accross, not 2.15" Man, I'm really confused :D:o

So is the 80 or 90 profile correct for the rear? And how can u tell from the old style measurements in the owner manual??

Hopefully Dave at TFB can enlighten me when I phone him Sharpy, but if anyone could explain it to me in the meantime, it would be much appreciated :)
 
Not exactly sure but wheel size refers to the inside width of the rim. (e.g. 2.15")

The 4.00" is the outside width of the tire.

120mm tire fits a 2.15"x17" wheel (e.g. 120/90-17) using most of Ed's numbers

BTW I have a 130/80-18 on the stock wheel on my 81 GS750EX (virtually identical to your 80?) as well. It is close to the brake arm but fits and handles well enough. What makes a bigger difference is having nice round profile tires. I put Avons on and the bike actually moves side to side much easier than my ED now. I have Pirelli sportdemons on the ED and there are worn with a flat spot in the middle. That makes them harder to get into a turn.

There is no need or desire for me to dropping down to a 120/90-18.

Pos
 
Last edited:
Tire and wheel width is something that comes up here all the time. Most people want the widest possible tire on their bike because they think it looks better. For a 2.15" wide rear wheel, a 120 is the max tire width that is generally recommended by the tire manufacturers. Regardless of what the experts say though, some people go wider than recommended...and live to tell about it. In the end, it's a personal choice. Using a tire wider than recommended will pinch in the sidewalls of the tire noticeably, and make the tread curve more tightly than designed. Again, most people don't seem to have serious problems with handling but my opinion is to let the tire people do what they do and our job is to listen and follow their lead unless we have compelling reasons not to.
 
Last edited:
Thanks guys :) Not interested in the widest tyres, just the right size ones for my rims. Am getting more sesible in my old age - hopefully!

Thanks for that Pos - that helps - will also stay away from the softer tyres I think.

Sorry Chef, forgot the US spelling - TIRES - happy? :p

Other normal English speaking people spell things as nature intended - tyre, colour ............ :lol::p
 
You must log in or register to reply here.
Back
Top