• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

umm, really stupid question...

  • Thread starter Thread starter fallous
  • Start date Start date
F

fallous

Guest
how the devil do you guys get the GS850G on the center stand by yourself? I'm no small potatoes at 6'5" 220lbs, but I'll be damned if I can wrestle this portly bike up onto the stand alone. Usually I get the wife to give the front end a bit of a shove when I'm standing on the centerstand foot lever and pulling back on the handlebars.

Is there some super secret method, or do I just need to pack on another 30 pounds of muscle?
 
Make sure both feet of the stand are touching the ground, then it's easy. If you've got it leaned so one foot is off, it's next to impossible.
 
Standing on the left side of the bike, you would put your left hand on the left handle bar and your right hand on the handle near the seat. As you push down on the centerstand with your foot pull up on the handle at the rear and pull back on the handlebar. The bike will come right up on the stand.
 
Don't use both hands on the handlebars to pull it back. I use my left hand on the handlebar grip to steady the bike. The leaverage comes from putting all of your weight on the arm on the center stand and using your right hand on the handle toward the rear of the bike. Lift up and back with that hand and arm as you push your weight on the arm of the center stand. Usually a quick motion will pop the bike up.

Bob
 
I am able to get my 1100 up on the center stand by myself and I'm only
5'8'' and 165. Its a matter of pulling up on the bike as you push down with your foot on the stand. Face the bike, I grab my crash bar, there should be a rail along your seat and pull and step at the same time and it should come up.
A little practice I'm sure you can do it. Good luck happy riding.
 
Technique

Technique

Hi Mr. fallous,

Yes, make sure both feet of the center stand are touching the floor. Then grab somewhere on the frame with your right hand, perhaps under the seat. I have a luggage rack bolted to the frame which make a pretty good handle. Take the handlebar in your left hand - this is more for control rather than lifting. Press the center stand to the floor with your right foot, and makes sure both feet of the stand are touching the floor. Then press down hard with your right foot while lifting with your right hand, letting the bike roll back just a bit. It's more about pressing down with your right foot than lifting with your right hand. Leave the side stand out just in case you have to set the bike down again. After it's on the center stand, then you can fold up the side stand. I'm 6' @ 200lbs. I'm sure you can do it with a little practice.

Thank you for your indulgence,

BassCliff
 
The one important thing nobody has mentioned is that the centerstand is designed in such a way that you don't have to lift at all. Simply pull the motorcycle backwards while holding the stand in place with your foot and the bike will lift itself onto the centerstand.
 
it's just odd that I struggle with this bike, but can I can throw an XS850 on its centerstand pretty easily... and that thing is a pig. I'm just not using enough oomph on the rear of the bike I guess.
 
You should have 1 hand on the left grip and 1 hand on the grab handle by the seat. Push the stand down to contact the ground. KEEPING YOUR BODY CLOSE TO THE BIKE, pull up the grab handle and keep your foot firmly on the stand. The bike should go up and back to rest. You can add a little rearward pull at the grip but the bike should go up and back as intended. This assumes the stand is properly lubed/operating correctly.
Most people make it harder by leaning away from the bike/sticking out their arse as they try to get it up, thinking they can use their bodyweight to stop the bike from falling away from them. Mistake.
Tip: you can make it easier or practice if you like by taking an approx' 1" thick piece of wood and wheeling the rear tire up on that piece of wood first (as long as that doesn't present you with a problem). Then try it. Easier? Some even use a piece of standard 2X4 (closer to 1 5/8"?)
 
You should have 1 hand on the left grip and 1 hand on the grab handle by the seat. Push the stand down to contact the ground. KEEPING YOUR BODY CLOSE TO THE BIKE, pull up the grab handle and keep your foot firmly on the stand. The bike should go up and back to rest. You can add a little rearward pull at the grip but the bike should go up and back as intended. This assumes the stand is properly lubed/operating correctly.
Most people make it harder by leaning away from the bike/sticking out their arse as they try to get it up, thinking they can use their bodyweight to stop the bike from falling away from them. Mistake.
Tip: you can make it easier or practice if you like by taking an approx' 1" thick piece of wood and wheeling the rear tire up on that piece of wood first (as long as that doesn't present you with a problem). Then try it. Easier? Some even use a piece of standard 2X4 (closer to 1 5/8"?)

my problem is that the centerstand just likes to skid across the concrete floor of my shop when I don't give it a good heave with someone pushing.
 
my problem is that the centerstand just likes to skid across the concrete floor of my shop when I don't give it a good heave with someone pushing.

Don't pull back, just lift a little on the back wheel and push down hard with your foot.

Your garage floor must be too clean. :)


Thank you for your indulgence,

BassCliff
 
If you are putting your weight on the centerstand it should not skid. Try puttin a piece of carpet or plywood down under the stand.
 
What works for me, although YMMV, is simple:

1) Put right foot on centerstand peg and plant your foot and it to the floor.
2) From the side of the bike, but up close to the frame center, put both hands on the handlebars and apply the front brakes
3) Push hard on the handlebars to compress the forks, and as they bounce back, just pull slightly rearward with the springs and the bike should pop up onto the centerstand, no problem. Use the mechanical advantage of the springs to do the lifting for you.

Good Luck.
 
Last edited:
I tend to let gravity do as much of the work as possible. I have found that if you lean over the bike a bit, you can get all your weight on your right foot, which is standing on the center stand. Now when you pull up on the grab handle, the bike almost jumps up there. That method works on all the GS bikes here as well as my Wing.

.
 
I reckon the backend of your bike must have all collapsed. What you need is ...
A new swingingarm
new shocks
new tyre


Alternatively....

What everybody else said.
Push down with your left foot on the centrestand, your left hand holding the left side of the bars.
Pull up and a wee bit back with your right hand on the back under the seat or on the grabrail if you have one.

I usually kind of bounce my bikes on to the centrestand, a la , 1 wee bounce, 2 bigger bounce, 3 yay, up onto the centrestand.

fyi, I'm 6 ft and skinnier than some skeletons.
 
Years back, I had the skidding problem, till I realized it was because the bike was still in gear..... put it in neutral and try again.
 
I was going to tell you how to do it, but EVERYONE else did! But here is what I do:

1. Adjust yourself. That always makes you look cool.
2. Peer over your shoulder. Should you f*** it up, you don't want anyone seeing you, but you also want some hot ladies around to see you with your sweet ride.
3. Wear sunglasses. I call them sunglasses, but OSHA calls them safety glasses.
4. Rev your engine. Alot. Do NOT honk your horn.
5. (optional; depending on manliness) Run your fingers through your hair. Again, the ladies love that.
6. Follow everyone elses instructions (there are plenty)
7. Stand back, admire your work, and enjoy the company of 3 hot ladies that want to bone.

Thats what I do...
 
If you have that much problem getting it on a centre stand sell the bike and get one with a side stand and use a paddock stand.

Suzuki mad
 

Similar threads

C
Replies
31
Views
4K
Captainkirk
C
Back
Top