• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Vaccum petcock convert without replacing?

  • Thread starter Thread starter Anonymous
  • Start date Start date
I'm not sure what exact problem your valve is causing, but I also had valve problems. My solution was to buy a $4.00 spring loaded vacuum ball check valve and put it in line with the vacuum hose between the carb and the fuel valve. Poof.... like magic...and it was only $4.00 in stead of $90.00. No muss, no fuss.
 
Oh. Forgot to mention. All functions of the fuel valve work as they were intended to also. (Pri,Run,Res)
 
I'll have to admit to a lack of understanding of the vacuum system here. I wouldn't have thought to put a valve in-line with the vacuum hose. I thought about just putting an off/on valve onto the fuel line in between the petcock and carbs and just leaving the petcock on reserve but sometimes it seems like even the reserve closes up from time to time and I have to take the vacuum line off of the carb and siphon to pop the fuel valve open because the engine isn't doing it.
 
Ah. Now I understand. You are haveing a problem with lack of fuel. It sounds like the vacuum isn't getting to the fuel diaphram. Putting a check valve in line won't help you then. If your petcock is like mine, there is a "built-in" check valve in the vacuum "cover", ( the part of the petcock assembly that has the vacuum port to put the hose from the carbs onto). In my case, that "built-in" check valve was decintegrated. That made the fuel diaphram act like a fuel pump and pressureized the fuel system. You too may have a problem with this "built-in" valve. I removed mine completely. But if you do that, you WILL have to put a check valve in the vacuum line or it will pump fuel in sted of simply opening the fuel diaphram.

A bit long winded. (sory) But, hope it helps somehow.

Good luck.
 
Thanks Don. With as much trouble as this thing has given me I just bit the bullet and picked up the pingel adapter plate and the cheap petcock to fit it:

http://www.z1enterprises.com/detail.aspx?ID=1744


Hooked it all up, it fit great and solved the problem...that is until gas started leaking from under the gasket that's provided with the adapter plate :|

I'm hoping that I just didn't prep it well enough with the sealing compound. Going to clean it all off and try again, we'll see.
 
You must log in or register to reply here.

Similar threads

adam83
Fuel Petcock interchangability for a 1983 GS1100E?
Replies
0
Views
54
adam83
adam83
M
81 850gl Power Lower
Replies
4
Views
36
Moarpower
M
H
GS 450 clutch plate assembly order.
Replies
0
Views
37
HabitualFungus
H
crazyramen
'79 750 Petcock - Replace or Repair?
Replies
7
Views
116
lizzywhite45
L
jharvey
When your Petcock is too big for its britches
Replies
17
Views
285
jharvey
jharvey
Back
Top