• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

weird spark problem

  • Thread starter Thread starter chris myers
  • Start date Start date
C

chris myers

Guest
I've been runniing on three cylinders. Started pulling plug caps to find the dead cylinder, got the cap to the top of the plug with spark jumping to the plug from the cap. The cylinder will then start firing. It does it every time and stops firing when I put the cap back on the plug correctly. Any ideas? It's a 78 GS750E with new dyna coils and matching ignition, new wires, plugs and caps. Thanks in advance. This turned out to be what I had thought was a carb problem.
Chris
 
There's a simple test you can do here: Swap that "suspect" cap to a different wire and see if the problem follows the cap. If yes, then get a new cap. If not, then swap wires. If the problem follows the wire then get a new wire.
You get the picture.
 
I first heard about this on the Wing board. When the current travels down the plug it does not immediately jump across the gap. It builds up then arcs across. If there is a crack in the insulator or deposits on it the charge will leak off to ground as it arrives and never create a spark. When you pull the plug cap off with the engine running you cause the charge to accumulate at the cap terminal, it then jumps the gap to the top of the plug and will jump immediately on reaching the end of the plug as the charge has already been accumulated.

My GS has resistor caps on it and the is also some resistance in the wires. This resistance would also cause some accumulation of the current. If you've got a stock set of coils it would be a good idea to run a resistance test on them to make sure they're in spec. Also check the plug caps to make sure they're the right ones. Some PO may have put on non-resistor caps when you need resistors for it.
 
fgh said:
I first heard about this on the Wing board. When the current travels down the plug it does not immediately jump across the gap. It builds up then arcs across. If there is a crack in the insulator or deposits on it the charge will leak off to ground as it arrives and never create a spark. When you pull the plug cap off with the engine running you cause the charge to accumulate at the cap terminal, it then jumps the gap to the top of the plug and will jump immediately on reaching the end of the plug as the charge has already been accumulated.
Click to expand...
The explanation above is correct. By enlarging the gap, pulling the cap a way from the spark plug, one intensifies the spark voltage. I have seen "Auxiliary Gap" spark plugs manufactured with a built in gap for the center electrode down inside the prorceline. They also use to sell a device (that had a fixed gap) that would fit between the automotive coil wire and distributor cap that claimed to increase power, fuel mileage and fire oil fouled spark plugs. I wanted to avoid that last item, BUT your little spark enhancement may be telling you, that you have a fouled spark plug, coud be oil, or could be fuel, or could be low compression.
 
nert said:
The explanation above is correct. By enlarging the gap, pulling the cap a way from the spark plug, one intensifies the spark voltage. I have seen "Auxiliary Gap" spark plugs manufactured with a built in gap for the center electrode down inside the prorceline. They also use to sell a device (that had a fixed gap) that would fit between the automotive coil wire and distributor cap that claimed to increase power, fuel mileage and fire oil fouled spark plugs. I wanted to avoid that last item, BUT your little spark enhancement may be telling you, that you have a fouled spark plug, coud be oil, or could be fuel, or could be low compression.
Click to expand...
DITTO! bad or fouled plug.
 
You must log in or register to reply here.
Back
Top