• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Which Progressives?

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
My fork seal is leaking, so I want to replace my springs with Progressives. Went to their applications site but my brain suffered a meltdown.

OK, What would y'all recommend? I have a 1980 750. Mostky ride twisties, some pretty bumpy and I always have to do a bit of dirt roads just to get home. Not very much rain to worry about. My rider weight is about 150lbs and I really want more stability on the beautiful curves around here. Please help, also, where to order for good price??

Thanks again, oh gurus of the GS.
 
I think you have 35mm dia tubes which would require part number 11-1135. You had better measure your tube to be sure. They're also calling for a travel limiter #30.5013. I have no idea what that's for, you better talk to them about that. The P.V.C. spacers can be found at a hardware store and it'll be explained in the instructions. I don't know if anyone discounts these things, I get mine through my local dealer. As far as the ride, they'll still be smooth but handling will improve. I would suggest also to go with a heavier fork oil. If the stock was 10wt, go to a 15 or maybe even 20.
Axel
 
Thanks for the info. I had 15wt put in when I first bought the bike, but it is very harsh. Then I read in my Clymer that they recommend going 15wt only if you are a heavyweight or are packing apassenger regularly. As I'm a "lightweight" female, I'm not sure exactly what to do. I do know that I want progressives :D
 
Motomedic:

I recently replaced the fork seals on my '83 GS750ES, and took the opportunity to replace the OE springs with Progressive Suspension equivalents. My 1983 model is very different from your 750 but I found the Progressive Springs are a noticable improvement for my bike: less dive on braking and more predictable handling, all without any detectable increase in harshness. I used 15W fork oil (Suzuki spec. calls for 10W).....same weight as I had already changed to before.

I did compare my OE springs with the new ones. The originals were a 2-rate spring, with the initial "soft" part very coarsely wound. The Progressives appeared to have a similar/same hard rate but the
"soft" part had a higher rate (tighter coil) than the originals. The Progressives are also a shorter spring, thus the need for spacers. I am fairly heavy (195 lbs) and usually carry a passenger.

Simon
 
Thanks, guys. Hey Simon, how did you figure out which spring to get? The Progressive application site had several models and I haven't a clue as to which one would suit me best.I am still thinking of going back to 10w because I'm significantly lighter and never pack more than my soft saddlebags for groceries.
 
Motomedic:

I have to admit that I ordered my Progresive Suspension springs through a new m/c shop started by acquaintances (a Kawasaki dealer but I wanted to give them some business!!). I did go to the Progressive site subsequently and confirmed that there was only one choice for my bike and that was the one they ordered. I haven't looked up ypur bike as of this reply.

As to rider weight vs. fork oil weight: I thought that overall rider + vehicle weight was largely compensated for by spring preload (i.e. pre-compression of the spring by spacer in this case) to result in a desired level of "sag". In the case of your relatively light weight, perhaps a minimum length spacer would be appropriate, but remember that the weight is rider + bike, with the bike contributing most (I hope!). I seem to remember reading that fork oil weight mostly affects rebound dampimg.

You might try contacting Billy Ricks by PM (much GS experience, including suspension) and/or calling Progressive Suspension direct for advice.

I hope that this helps.

Simon
 
Thanks, Simon. I ordered the 30/50 from Motorcycle Accessory Warehouse for $57.95. You were right, there is only 1 application for my model, which was fortunate, becaus I still am not sure how much of my bike is an "L" and how much is an "E".

Pam
 
Pam:

Good luck with the fork work. Let us know how it goes and how you like the changes.

Simon
 
You must log in or register to reply here.

Similar threads

NotASparky
Trigger Warning: Purists Beware!
Replies
10
Views
278
Big T
Big T
S
A one year rider and a 46 year old sport touring motorcycle - 1979 GS850
2
Replies
20
Views
484
Grimly
Grimly
Zellock
That's a Texas GS450T, y'all
2
Replies
23
Views
327
Rich82GS750TZ
Rich82GS750TZ
E
'83 1100E assorted newbie questions - what am I dealing with?
Replies
9
Views
185
eldevigo
E
Rijko
Larry Pearson replica in the making
Replies
7
Views
215
Rijko
Rijko
Back
Top