N
ninjadave7
Guest
Hey all,
Just rebuilt the carbs on my '80 GS850 per the bikecliff guide and got the bike back together. Took me a while, but synced it with the cheaper sync from Z1. I think the bike got too hot (no fan or extension cord to get one out there...) but I did take breaks to let it cool down. My concern is that there is white smoke blowing out the left side exhaust - 1&2 cylinders, and when I gun it (in neutral) there is a sharp noise on that side once I hit around 4k. I don't know how to describe it, almost metal-on-metal-ish but without any kind of grinding sound.
I did make one mistake initially, didn't double check and accidentally hooked up the vent hose between carbs 1 & 2 to the gas tank...
and ended up with gas pouring out the real intake hose. Got those switched back in a hurry... could that have damaged the engine? Please say no???
I'm worried about riding it before I know what the problem might be so I don't accidentally damage anything further, if there's damage. Could it just be overheating?
Just rebuilt the carbs on my '80 GS850 per the bikecliff guide and got the bike back together. Took me a while, but synced it with the cheaper sync from Z1. I think the bike got too hot (no fan or extension cord to get one out there...) but I did take breaks to let it cool down. My concern is that there is white smoke blowing out the left side exhaust - 1&2 cylinders, and when I gun it (in neutral) there is a sharp noise on that side once I hit around 4k. I don't know how to describe it, almost metal-on-metal-ish but without any kind of grinding sound.
I did make one mistake initially, didn't double check and accidentally hooked up the vent hose between carbs 1 & 2 to the gas tank...
I'm worried about riding it before I know what the problem might be so I don't accidentally damage anything further, if there's damage. Could it just be overheating?