.png "Powered by vBulletin")
Bike would start and run great. I changed the oil and replaced clutch springs and it ran great after that. Well now it won't crank it will turn over and it makes a sharp hiss like noise then stops? Please help thanks
-
-
Sounds like it could be the starter clutch. Your description is a little confusing: "wont crank" but "will turn over"? Are you saying the starter runs, but it doesn't crank the engine over?
image.pngLast edited by KiwiAlfa156; 12-04-2023, 08:28 PM.
"Johnny the boy has done it again... This time its a scrubber"
Darryl from Kiwiland
1982 GSX1100S Katana 1982 GSX750S Katana 1982 GS650G Katana -
Most likely means:Originally posted by KiwiAlfa156 View Post
Crank, no start. They like to use the word "crunk" around here.
"won't stay crunked" is an example. I cringe every time I here this.Current:
1993 ZX11 - 2nd build in progress
1977 GS750 (710 is getting closer)
1998 Kawasaki Voyager - selling
1998 Chevy C2500
1999 Rav4Comment
-
As far as I know, the English language can get pretty imprecise!Jim, in Central New York State.
1980 GS750E (bought used June,1983)
1968 CB350 Super Sport (bought new Oct,1968)
1962 CA77 305 Dream (bought used Feb,1963)Comment
-
Yes i mean the stater will turn over but will not crank the motor. And it makes a crazy sound almost like when u disconnect a pneumatic tool from a compressor. That's the best description I can think of.Comment
-
Starter not staterComment
-
Looks like KiwiAlfa got it right in post # 2.1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100Comment
-
Jim, in Central New York State.
1980 GS750E (bought used June,1983)
1968 CB350 Super Sport (bought new Oct,1968)
1962 CA77 305 Dream (bought used Feb,1963)Comment
Comment