Search Result
Collapse
63 results in 0.0070 seconds.
Keywords
Members
Tags
-
Sticking Slides
Hello all. I’m new to the forum and am looking for some help with an apparent carburetion issue. I have combed through the internet but haven’t...Last edited by motobean; 03-12-2025, 06:54 PM. -
Float bowl levels
I am currently setting my float bowl levels for a ‘80 GS450 and the manual says between 21.4 - 23.4mm but when I set it to that spec the float is... -
Trouble starting 79 GS750L
I am trying to help a friend whose husband died less than 2 years ago sell (get running) this bike that he owned. Only has 15K miles out and it... -
1980 Suzuki GSX400 Choke issues
I’ve disassembled and cleaned the carb on my 1980 Suzuki GSX400 four times now. The bike runs and rides well, but I’m having some trouble... -
GS700E won't start when cold runs rich on choke
I'm hoping someone can give me some insight. I recently became owner of a 1985 GS700E and have been working on it non-stop over the last couple months... -
Mounting place of throttle return spring
Dear all,
I am working on GS550. The year is hopefully being identified somewhere in this forum, but I guess that we are somewhere around... -
82 gs650e would start now it wont
Bike would start and run great. I changed the oil and replaced clutch springs and it ran great after that. Well now it won't crank it will turn over and... -
‘1982 GS450 Carb parts
Alas, I finally found a stock set of carbs and airbox for my ‘82. Been battling aftermarket VM30s and pods now for almost two years. Never got the... -
Will yamaha carbs work?
So it turns out the carbs that came with my bike are from a 89-93 yamaha fzr600. They fit perfect on my 82 gs650 but they do not have a vacuum line hookup... -
Help! Carburetor/fuel mixture problem (I think) 1979 GS1000
Hello all,
This is my first post here and I hope to gain some knowledge from you folks that probably know quite a bit more than I do.... -
1979 GS550L Intake boots replacement
Hey folks, I really could use some help locating replacement intake boots for my 1979 GS550L. I can not find any inside the US and I've been looking for...1 Photo -
Missing Aluminum Carburetor Plug
Hello all!
Long time lurker and new poster. First off, this forum has been amazingly helpful for getting a 1981 GS850G that I stumbled upon... -
GS1100E with Mikuni BDST 32 Carbs
I'm beginning a restoration on a 1983 GS1100e that's been setting for about 20 years, and I'm looking for some advice.
I do not have the...Last edited by Guest; 06-24-2021, 09:05 PM. -
Engine Stops While on Idling Rev
Hi everyone,
So my friend and I managed to start a 1978 GS750 engine running, special thanks to TrialsRider from CafeRacer.net for helping...