Valve lapping questions ? compressor suggestion, lapping compound, is it even needed?

[Steve]

FYI, your video cited no longer plays

Yes, that has been noted, but that is up to BassCliff and his website skills to fix.

I see him pop in occasionally, but probably not often enough or long enough to note some of the problems that have popped up with his site.

.

[Nessism]

Andrew, it's not hard to install the cylinder. Please do some research, there are countless threads on how to pinch in the rings and make ring compressor tools.

[Andrew Vanis]

so whet am I in for if I take off the cylinder? how hard is it to get the cylinders back in and do I need ny special tools?

[Nessism]

With only 14k on the engine there is no urgency to do the rings, although some people just do them as a matter of course when the engine is apart.

I would most definitely pull the cylinder and replace the base gasket while the head is off.

Be sure to use OEM Suzuki gaskets if you value oil tightness.

[Andrew Vanis]

I was going to offer my suggestion how to do it until I clicked on the link.

Those are MY grubby hands in those pictures.

.

FYI, your video cited no longer plays

[Andrew Vanis]

The process of removing the head has already disturbed the seal on the base gasket, most likely rendering it useless, but you won't know until you get the engine all back together and find that it leaks. Like you say, it's only $11 (now), but it's another $200 gasket kit if you need to do it over..

OK, let.s say to do the base gasket, what does that involve as far as dealing with he cylinders? Ring compressor? If I.m that far, should I replace the rings and hone he cylinders? If I just put the cylinder head back with the old rings what other issues am I causing?Also, my base gasket shows some o-rings, do those get replaced if the base gasket does? See schematic link aboveLet me know because at this time I.m thinking of doing the gas test on the valves and if that passes put the thing back together take my chances on the base gasket and stop this trip down the rabbit hole.

[Steve]

I was going to offer my suggestion how to do it until I clicked on the link.

Those are MY grubby hands in those pictures.

.

[blowerbike]

I was going to not us the cups/sticks and either use the tube over the stem and pull/turn or the hose on the end of the drill a'la the manual on Basscliff's site http://gsarchive.bwringer.com/storag...LAP_VALVES.pdf

sounds like a plan to me...

[Steve]

Yeah, what’s another $80 OEM ($30 aftermarket) but if I don’t need to touch the valves, I’m inclined to leave in what is in there. ... That would require reseating the cylinders no? Pricewise not much $11 gasket and 4x$5 orings. Really inclined to leave this one alone considering the cylinder work and the issues of maybe not seating the rings right.

The process of removing the head has already disturbed the seal on the base gasket, most likely rendering it useless, but you won't know until you get the engine all back together and find that it leaks. Like you say, it's only $11 (now), but it's another $200 gasket kit if you need to do it over.

Originally Posted by tkent02
Check with gasoline in the combustion chambers, if it's not leaking



How?.

Turn the head upside down with all the valves installed and closed. Pour some gasoline into the cumbustion chamber, let it sit for a while. If the valves leak, the gas level in the chamber will go down.

.

[Andrew Vanis]

Originally Posted by tkent02
Check with gasoline in the combustion chambers, if it's not leaking



How?.



Found this which was insightful. will try that.......

[Andrew Vanis]

8 valve models have larger valves.
16 valve models have smaller valves.
right off the top of my head that means you need different size valve lapping sticks/cups.

I was going to not us the cups/sticks and either use the tube over the stem and pull/turn or the hose on the end of the drill a'la the manual on Basscliff's site http://gsarchive.bwringer.com/storag...LAP_VALVES.pdf

[Andrew Vanis]

Determine which you have and act appropriately. Does your "L" have 8 valve? 2 per cylinder or 4 per cylinder?

4 per cylinder (16 total). this style - http://gsarchive.bwringer.com/bikecliff/images/16valve_adjustment.pdf

what is the appropriate action in that case?

[posplayr]

for someone not knowledgeable in the differences, what should i be concluding from that? aka-what difference does it me for my style of valves?

Determine which you have and act appropriately. Does your "L" have 8 valve? 2 per cylinder or 4 per cylinder?

[blowerbike]

i have only had one style of compressor for all my years..
it's the one with the lever you move and then you take up all the slack in the bolt that you turn to compress the spring.
this type cuts down on all the turning to and from and i have used it on 8 and 16 valve models.
mine says "made in japan" on it.

[tkent02]

Not sure but do the other style valve compressors work on the 16 valve heads?