Announcement
Collapse
No announcement yet.
Stator papers
Collapse
X
-
Originally posted by Allie View PostsigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.
-
Originally posted by Allie View PostWhen the Stator Pages was first published, was the shunt vs. series issue widely known? I get the idea that when Electrex started selling, going to another shunt R/R was the best option that was generally known about. I don't see how you can justify slamming them for selling it, unless it was actually inferior to the stock units which I doubt is true. If they knew at the time that it wasn't the best option then I could see it I guess, but did they? I'm also not seeing the dishonesty in relationship that you descry, I mean it was pretty plain that GSR endorsed the product, I thought. The info and product, as far as I can tell, was stator of the art at the time, and the only real issue you can legitimately take up is why it has taken so long to get it updated, or are you saying there is some kind of kick back continuing?
If you are responding to me, I guess my only response is to re-read what I said. I certainly did not state that Electrix/electrosport should be "decryed" because they want to sell Shunt R/R's. You are taking great liberty in attributing such an insinuation to me.
The authors of the Stator Pages acted as "shills" on behalf of Electrosport. That is a plain fact assuming common usage of the English language.
Comment
-
Originally posted by posplayr View PostAllie,
If you are responding to me, I guess my only response is to re-read what I said. I certainly did not state that Electrix/electrosport should be "decryed" because they want to sell Shunt R/R's. You are taking great liberty in attributing such an insinuation to me.
The authors of the Stator Pages acted as "shills" on behalf of Electrosport. That is a plain fact assuming common usage of the English language.
Okay so, and I'm sure I could have missed this which is why I'm asking, by your use of the word 'shill' the author of the papers either worked for or owned Electrex? Okay fair enough if so, though I'm not exactly sure what harm was done at the time though, other than getting some free advertising for a good for the time product.
You most certainly do slam them for selling their product though, that much is plain.
Regardless, to someone who doesn't know a lot of the back story (that's a lot of us) you come off pretty harsh, and I've seen it a few times. And I'm not the only one. I'm sure you have a lot of good points but you're not exactly doing your own business any good when you launch these little tirades. And they're not always confined to this subject. You're certainly not making your wares attractive to me at any rate. For what it's worth... You can respond however you want but I see no point in arguing the issue any further, it is what it is and you're gonna do what you're gonna do."Men will never be free until Mark learns to do The Twist."
-Denis D'shaker
79 GS750N
Comment
-
jimbo
Hey fella's, I'm a newbie, but I seem to have inflamed a touchy subject. I only want to know how to rewire my stator and modify my harness to give good performance. I am a layman and your way over my head here. My thought was simple directions on how to rewire in the 3rd phase of my stator and or improve the grounding of the rr as well as clean up my loom. Thanks
Comment
-
Crikey, I didn't intend to turn this thread in a southerly direction with my comment. It was a brief remark as I didn't see the same intent as Jim did. No more than that, ...... I'm not sure I do now.-Mal
"The only reason for time is so that everything doesn't happen at once." - B. Banzai
___________
78 GS750E
Comment
-
You guys didn't start it, it's an old issue apparently. I didn't really want to get that far into it, but one thing led to another, as it often does. Good luck with your project Jimbo, I'm sure you'll find the info you need."Men will never be free until Mark learns to do The Twist."
-Denis D'shaker
79 GS750N
Comment
-
I use an ElectroSport stator and think it is a very good product. When I first got into this I was looking for a stator and ran into some posts on someone who burned through about three ElectroSport stators in a row. It turned it was the new ElectroSport R/R that was burning them out. I think they replaced both products and he still had problems until he figured out the R/R's were junk. Faced with proven failures the company never bothered to change the product. This was about the time Jim was trying to introduce the Series R/R and there was a lot of flack from some people about that. Personally I think Jim has done everyone on GSR a great service and it's time to get his information printed up as the official GSR Stator Papers.http://www.thegsresources.com/_forum...ine=1440711157'78 GS1000E, Dyna-S ignition, Dyna Green Coils, K&N pods, Delkevic SS 4-1 exhaust, Dynojet Stage 3 jet kit, Russell SS Brake Lines, Progressive suspension, Compu-Fire series Regulator 55402 and Advmonster cree LED headlight conversion.
Comment
-
Originally posted by OldVet66 View PostI use an ElectroSport stator and think it is a very good product. When I first got into this I was looking for a stator and ran into some posts on someone who burned through about three ElectroSport stators in a row. It turned it was the new ElectroSport R/R that was burning them out. I think they replaced both products and he still had problems until he figured out the R/R's were junk. Faced with proven failures the company never bothered to change the product. This was about the time Jim was trying to introduce the Series R/R and there was a lot of flack from some people about that. Personally I think Jim has done everyone on GSR a great service and it's time to get his information printed up as the official GSR Stator Papers."Men will never be free until Mark learns to do The Twist."
-Denis D'shaker
79 GS750N
Comment
-
Old age and treachery will beat youth and skill every time1983 GS 750
https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg
Comment
-
Originally posted by jimbo View PostHey fella's, I'm a newbie, but I seem to have inflamed a touchy subject. I only want to know how to rewire my stator and modify my harness to give good performance. I am a layman and your way over my head here. My thought was simple directions on how to rewire in the 3rd phase of my stator and or improve the grounding of the rr as well as clean up my loom. Thanks
Technical Info posts that are deemed to be important or popular will be placed here for easier access. If you feel a post should be moved from the Technical Info forum to here then PM the Administrator with your request.
then this.....
in summary, you want to eliminate that stator loop going to headlight switch, wire all 3 stator outputs direct to a decent R/R - by decent, I mean a shunt Shindengen or even better , a series SH-775 unit.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
Comment
Comment