Seeking...

[Guest]

.....a complete sprocket and chain set for my GS1100ES.

Any referrals are appreciated.

email: merkid00@gmail.com

[JTGS850GL]

Might want to post in the parts wanted section.

[ShadowFocus603]

16t front, 48t rear with a quality o-ring chain. Contact Z1 enterprises for further help. 16/48 will give you nice bottom end grunt.

[bwringer]

Agreed. Call Z1 Enterprises and convert to a nice modern 530 chain.

[steve murdoch]

Merc, a lot of guys on GTAM recommend Glen at Flying Squirrel for parts like this.
If you wanted something local.

http://www.fsmotorcycle.com/

[Mercaholic]

Merc, a lot of guys on GTAM recommend Glen at Flying Squirrel for parts like this.
If you wanted something local.
http://www.fsmotorcycle.com/

Thanks Steve.

I've had good dealings wit them in the past.

[loud et]

Agreed. Call Z1 Enterprises and convert to a nice modern 530 chain.

When I converted to the 530 I sort of pushed the old 630 chain off to the side in the garage under a stationary cabinet. I knew it was there but just sort of left it there a couple years. At some point on time I did a scrap metal cleanup and scoured the garage for all the junk metal. I pulled that thing out and had forgotten what a tank track that thing is. Lol