It lives

Looks Great Bill............Now let me ask you; do you pull the broken motor with one hand while installing the new motor with the other or does it take 2 hands??

It would take me 2 days to rig up a chain hoist. Next time I'll just send you bus fare

Confucius say clean out pipe from blown up motor before installing it on a different motor Grasshopper.

Confucious say, man who twist trottle twist crank. Man who twist crank,
have panties in wad

[Dave8338]

Hey those saddle bags are required for waterbottle attacks

OR in Bills case...SPARE PARTS!!!

[posplayr]

Loose the bags and the seat, throw some paint at it and you'll have a good looking bike. Something about seeing an "L" with the square cam caps makes me smile!

AHHHHH yet another Love Story between a man and his L...it warms my heart!

Hey those saddle bags are required for waterbottle attacks

[Dave8338]

Funny, he didn't say anything about the windshield.

.

I figured if Bill is riding it in the "winter" months, he might like the added comfort of a screen.

Try not to blow this one up

[Steve]

Loose the bags and the seat, ...

Funny, he didn't say anything about the windshield.

.

[Dave8338]

Loose the bags and the seat, throw some paint at it and you'll have a good looking bike. Something about seeing an "L" with the square cam caps makes me smile!

AHHHHH yet another Love Story between a man and his L...it warms my heart!

[salty_monk]

Looking good

Is that a new exhaust?

At least it is good to know that you are back on two wheels!

Eric

[chef1366]

Looks good! What is wrong with it???

Eric

Nothing. Just needs a little paint.
It runs great. A little rich on the main but I may just keep it that way.
I know you can't see it but I also have an 83 rear rim on it.
1980 GS1100LED. Thanks Jim!

Looks good! What is wrong with it???
(Not ENOUGH Compression?) J/K!

Eric

[chef1366]

[chef1366]

Unveiling the new sh!tbag L with the black motor and aluminum side covers. Runs like a top.
The clutch rattled like hell at low RPMS so I took a looksy.
Had a Barnett clutch in and the basket had a 1 inch wobble because the nut was loose. The PO didn't even bend over the lock washer. Two fibers were completely gone and they added an extra steel to make up the difference. 10 fibers and 11 steels. It actually worked. Put a good stock clutch in it with HD springs and good to go.
I know it's fugly but I'll paint the covers.
Will fine tune the carbs and just ride it this winter. NO mods!

[salty_monk]

Must have made a nice cloud when it got hot... hmm the smell of burning oil at 6am