Project Beast back on track

[renobruce]

What about the frame bracing??? That's what I'm waiting for. Wanna see what goes down so I can get some ideas for my 1000. Not looking to go too crazy, just add a little more meat in the places that need it. Any info on this? I have a bunch of steel plate left over from my trailer build. Was thinking of using that too.

If I EVER get this motor back together, I'll then be starting on the frame. I'll post up what I do with the frame. I will probably go with this bracing:

[Tarbash 27]

What about this? Thats what I bought.

http://secure.mycart.net/catalogs/catalog.asp?prodid=305516&showprevnext=1

[renobruce]

What about this? Thats what I bought.

http://secure.mycart.net/catalogs/ca...showprevnext=1

for your 750? And it was the same dimensionally?

Thanks for the link.

[Tarbash 27]

Its going in my 1000 motor.

[rapidray]

That's the one you need Bruce! Ray.

[first timer]

What about this? Thats what I bought.

http://secure.mycart.net/catalogs/ca...showprevnext=1

I hope thats the one needed I have one coming from ape any day now for my 1K

[first timer]

If I EVER get this motor back together, I'll then be starting on the frame. I'll post up what I do with the frame. I will probably go with this bracing:

Bruce you may want to check the knarf project and craig smiths project over at oldskool, the brace shown here might be over kill. I know they modeled the Knarf project bike off of old Yosh bracing.

[renobruce]

Bruce you may want to check the knarf project and craig smiths project over at oldskool, the brace shown here might be over kill. I know they modeled the Knarf project bike off of old Yosh bracing.

Thanks! I'll take a look. I have that old Yosh article on the GS1000 build. I did notice that they didn't brace as much as my photo.

[renobruce]

That's the one you need Bruce! Ray.

I bought one today off an ebay store. I had a coo-pin!

Hey, Ray. I need some stock 1150 wheels. Got any?

[jwhelan65]

Woah

Looks like were gonna get schooled here...should be a monster! Can't wait to see this thread as it comes together! Copy and save !
j

[rapidray]

Sorry Bruce, I've only got 82 & 83 1100 wheels left. Any word from the owner of the blue E? Thanks, Ray.

[jwhelan65]

Bolt kit

Where are you getting your chrome bolt kit for the engine? I have seen them on ebay. Not sure of the quality..

[renobruce]

Where are you getting your chrome bolt kit for the engine? I have seen them on ebay. Not sure of the quality..

I used these guys:

http://www.pointe-products.com/subcats.asp?catid=100&catname=Metric+Chrome+Fasteners

On this project I'm using chrome, not stainless.

[renobruce]

Sorry Bruce, I've only got 82 & 83 1100 wheels left. Any word from the owner of the blue E? Thanks, Ray.

I'll try and get a hold of him...

[renobruce]

Where are you getting your chrome bolt kit for the engine? I have seen them on ebay. Not sure of the quality..

To follow up, I didn't use a "kit". I figured out what I needed and ordered it. I used the mushroom head bolts for the cam cover and for the cam chain tensioner, oil cooler adapter and tach gear, and I'm using chrome hex head bolts for the side covers.




Here's a link to some pics of the project so far. They are mixed up a bit... I need to re-arrange the photos to show the progression.

http://s19.photobucket.com/albums/b182/renobruce/GS1000E%202/?start=all