Announcement

Collapse
No announcement yet.

I was looking for a winter project.........I found this!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Should be riding by the weekend. Keep it up, Ron!
    Rich
    1982 GS 750TZ
    2015 Triumph Tiger 1200

    BikeCliff's / Charging System Sorted / Posting Pics
    Destroy-Rebuild 750T/ Destroy-Rebuild part deux

    Comment


      #62
      Got a little more done today. Installed a new drive sprocket and o-ring chain, chain guard, rear fender, rear master cylinder, center stand, battery box, wiring harness and the electrical plate.

      Of course, the stainless brake lines arrived a day early, without the rear line! Oh well, I've got plenty to keep me busy! Hope to get the rear section assembled this week.

      Ron
      When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
      1978 GS750E - November 2017 BOTM
      1978 GS1000C - May 2021 BOTM
      1982 GS1100E - April 2024 BOTM
      1999 Honda GL1500SE

      Comment


        #63
        Still plugging away at it! Got the rear turn signals, tail light and a few other small items installed today.


        Ron
        When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
        1978 GS750E - November 2017 BOTM
        1978 GS1000C - May 2021 BOTM
        1982 GS1100E - April 2024 BOTM
        1999 Honda GL1500SE

        Comment


          #64
          Looking great. At this point you may need a second half of winter project...
          sigpic
          When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

          Glen
          -85 1150 es - Plus size supermodel.
          -Rusty old scooter.
          Other things I like to photograph.....instagram.com/gs_junkie
          https://www.instagram.com/glen_brenner/
          https://www.flickr.com/photos/152267...7713345317771/

          Comment


            #65
            Thanks! Still a LOT of stuff to do! Hope to have it finished by April or May. Just in time for Brown County!
            Ron
            When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
            1978 GS750E - November 2017 BOTM
            1978 GS1000C - May 2021 BOTM
            1982 GS1100E - April 2024 BOTM
            1999 Honda GL1500SE

            Comment


              #66
              Understood.... the details take the longest.
              sigpic
              When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

              Glen
              -85 1150 es - Plus size supermodel.
              -Rusty old scooter.
              Other things I like to photograph.....instagram.com/gs_junkie
              https://www.instagram.com/glen_brenner/
              https://www.flickr.com/photos/152267...7713345317771/

              Comment


                #67
                Made a little more progress today. Trying to do something every day so I don't start getting lazy(ier) about it! Got the coils and horns mounted. Waiting on the Deoxit to arrive to start cleaning connections.

                Last edited by 1978GS750E; 01-24-2023, 06:40 PM.
                Ron
                When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
                1978 GS750E - November 2017 BOTM
                1978 GS1000C - May 2021 BOTM
                1982 GS1100E - April 2024 BOTM
                1999 Honda GL1500SE

                Comment


                  #68
                  Rear stainless brake line finally made it here! Got it installed and the rear brakes bled.

                  Ron
                  When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
                  1978 GS750E - November 2017 BOTM
                  1978 GS1000C - May 2021 BOTM
                  1982 GS1100E - April 2024 BOTM
                  1999 Honda GL1500SE

                  Comment


                    #69
                    Just wondering... When finished will there be anyway to tell it ain't new??? Other than the numbers on the odometer... Sure looking good so far.
                    1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                    Comment


                      #70
                      Originally posted by rphillips View Post
                      Just wondering... When finished will there be anyway to tell it ain't new??? Other than the numbers on the odometer... Sure looking good so far.
                      Thanks! I'm hopeful that it will turn out as well as my 1978 GS1000. If it does, I'll be one happy camper!
                      Ron
                      When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
                      1978 GS750E - November 2017 BOTM
                      1978 GS1000C - May 2021 BOTM
                      1982 GS1100E - April 2024 BOTM
                      1999 Honda GL1500SE

                      Comment


                        #71
                        That's turning out to be a beautiful job. We may have to discuss a trade down the road. I think you would look good on a 19 year newer bike made by some of the best engineers in Germany.
                        Larry

                        '79 GS 1000E
                        '93 Honda ST 1100 SOLD-- now residing in Arizona.
                        '18 Triumph Tiger 800 (gone too soon)
                        '19 Triumph Tiger 800 Christmas 2018 to me from me.
                        '01 BMW R1100RL project purchased from a friend.

                        Comment


                          #72
                          Originally posted by alke46 View Post
                          That's turning out to be a beautiful job. We may have to discuss a trade down the road. I think you would look good on a 19 year newer bike made by some of the best engineers in Germany.
                          Thanks!

                          Lets see...........19 years newer, German engineering.......oh yeah.....and all that cash!

                          Yeah, we can talk!
                          Last edited by 1978GS750E; 01-25-2023, 08:59 PM.
                          Ron
                          When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
                          1978 GS750E - November 2017 BOTM
                          1978 GS1000C - May 2021 BOTM
                          1982 GS1100E - April 2024 BOTM
                          1999 Honda GL1500SE

                          Comment


                            #73
                            Actually got in the garage today! Got the forks rebuilt and the lowers painted.

                            Ron
                            When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
                            1978 GS750E - November 2017 BOTM
                            1978 GS1000C - May 2021 BOTM
                            1982 GS1100E - April 2024 BOTM
                            1999 Honda GL1500SE

                            Comment


                              #74
                              Got some more painting done and cleaned up most of the electrical connections this afternoon. Waiting on bearings, and then I can start putting the front end on it!

                              Geez, sometimes it seems like this is taking forever!


                              Ron
                              When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!
                              1978 GS750E - November 2017 BOTM
                              1978 GS1000C - May 2021 BOTM
                              1982 GS1100E - April 2024 BOTM
                              1999 Honda GL1500SE

                              Comment


                                #75
                                Hey, just wondering your thoughts on those anti-dive units? Many have thought they were useless and think the bikes will be just as good, or better off, with them removed or blocked off. No doubt for being completely original they got to be there.
                                1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

                                Comment

                                Working...
                                X