Project Cooley Beast

[Guest]

Looks absolutely fantastic!! what type of shocks are those?

Those are Works Performance Billet Trackers with ARS. I stripped off all the clearcoat and stickers and polished them.

[Guest]

Some progress. Got the engine in today. Finished painting the GS1100 calipers that I'll be using. The 1150/1100 wheels I'll be using are stripped and ready for polish, paint, and new bearings. Sorry for the crappy pics.

[Guest]

Super sharp pics?
Has anyone here who is doing or done a replica ever sent Wes a thank you card? He is still alive yas know.

I tried to contact him to sign my tank. No luck. He lives in Idaho, I think, and works as a nurse.

[FreshStart]

I tried to contact him to sign my tank. No luck. He lives in Idaho, I think, and works as a nurse.

Thats all i could turn up for info as well. He should be a member here after all we are his biggest fans

[Guest]

I tried to contact him to sign my tank. No luck. He lives in Idaho, I think, and works as a nurse.

Well that makes total sense. I'll have to try and meet him some day. Bruce how are you treating your nuts and bolts that aren't S/S?

[Guest]

Well that makes total sense. I'll have to try and meet him some day. Bruce how are you treating your nuts and bolts that aren't S/S?

the engine has all new chrome bolts. Any other bolts on the frame, etc. that I am re-using are being polished.

[Sandy]

Thats all i could turn up for info as well. He should be a member here after all we are his biggest fans

You might try Twins Falls, Idaho???

[AF_Bill]

Bruce, that is gonna look BEAUTIFUL once its all done.

[FreshStart]

You might try Twins Falls, Idaho???

Wouldnt happen to know his wif?es name

[Guest]

Bruce, that is gonna look BEAUTIFUL once its all done.

Thanks. It should RUN pretty good, too!

[jwhelan65]

Black with polished tops and bowls, chrome hardware, aluminum choke spools.

Sounds familiar.. This is looking fantastic!

[russr33]

Bruce you have to do a custom can on that Yosh. If someone up there can't do it send it to me and we'll have Jemco do it and use my S for mock up. You know you want a more up-swept look. Here are before and afters of same pipe you have.

See posts #16, 21. Also see #24 for not quite as aggressive look

http://www.thegsresources.com/_forum/showthread.php?t=171325&page=2

[jwhelan65]

I'm thinkin two budwieser alluminum non-retunables end for end would make a nice can..

[Can_O_Tuna]

Incredible work Bruce. Your bikes are works of art.

Looks like Mr Cooley is in Bend, OR

[Guest]

Bruce you have to do a custom can on that Yosh. If someone up there can't do it send it to me and we'll have Jemco do it and use my S for mock up. You know you want a more up-swept look. Here are before and afters of same pipe you have.

See posts #16, 21. Also see #24 for not quite as aggressive look

http://www.thegsresources.com/_forum...=171325&page=2

Yeah, I'll do something when I can afford to. It looks pretty low in that pic of yours. Did you have clearance issues?