WTG!!! 
Eric
Eric
-
-
You are one master craftsman.I am impressed.future owner of some year and displacement GS bike,as yet unclaimed and unowned.Comment
-
Very nice job.Cowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"Comment
-
Red coats 2, 3 and 4 applied. No runs drips or errors. Picked up a bit of dust on top of tank but it will sand out with the clear. Overall for using a 1985 model binks siphon mini gun and leftover aircraft paint, very happy. Now I will let it dry till tomorrow and then spray the white and do the pinstripes. White is leftover jet-glo matterhorn white and got one shot imitation gold for the stripes
Comment
-
One more tank shot, the doi and gloss is nice for what i started with I think
Comment
-
The old binks mini is good for small jobs, it did fine for this and will be fine for the white. Gonna do the pinstripes by hand, been 15+ years since i've tried em
Comment
-
Finished taping off for the stripes and got them shot with 3 coats. Cleaning up some edges.
[IMG]
[/IMG]
Comment
-
She is going to look sweet!
EricComment
-
If anyone has a 78 tank with stock or repro pinstripes I could use a hand.
Need the width measurements of the stripes, and also distance in between them and the distance from the indentation. Just one set of measurements from say the mid point top of the indent would do, I can interpret from there. Thanks in advance.Comment
-
deja vu.....looks like what Svsooke is doing.....reds are a bit different....
nice work...by the way....
.Comment
-
Comment
-
Bike is looking GOOD! You're doing an awesome job.
Keep going...Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Except I haven't had a chance to get that far. I've been filing out a tiny little washer for a fuel mixture screw.Comment
-
Here's a picture of the tank...
By rusty_bronco at 2011-02-09
measurements will come as soon as I can.Comment
Comment