750 Katana Resurrection

[Guest]

I think I'm brake rotor obsessed... That cat in the background has two right hand rotors on the front wheel, I believe...

[KiwiAlfa156]

I think I'm brake rotor obsessed... That cat in the background has two right hand rotors on the front wheel, I believe...

That'd be correct, it's how that arrived too. I have a couple of sets of front rotors. Until I do something about it, you'll just have to look away.

[Grimly]

I recently bought a pair of nearly-new front discs. The fact that they're both LH means nothing to me. I really couldn't care less.
They were being sold cheap as an unmatched pair for less than half the price a used matched pair would be, even well used.

[Nessism]

BRAKE DISC
59211-45250

Both RH and LH discs are the same PN

[KiwiAlfa156]

BRAKE DISC
59211-45250

Both RH and LH discs are the same PN

CMSNL lists RH 59211-45250 LH 59221-45250 (difference is the fourth digit)

[KiwiAlfa156]

I recently bought a pair of nearly-new front discs. The fact that they're both LH means nothing to me. I really couldn't care less.
They were being sold cheap as an unmatched pair for less than half the price a used matched pair would be, even well used.

.

Can't see 'em when your riding. I'd actually forgotten that the 650 had mismatched front discs.

[Grimly]

.

Can't see 'em when your riding. I'd actually forgotten that the 650 had mismatched front discs.

Exactly, and nobody's going to get a chance to see 'em as I whip past them too fast.

[Nessism]

CMSNL lists RH 59211-45250 LH 59221-45250 (difference is the fourth digit)

I stand corrected. Sorry.

[KiwiAlfa156]

I stand corrected. Sorry.

No need to be sorry my friend.

[KiwiAlfa156]

Fairing sub-frame reassembled. Old headlight in as a place holder. A little tweaking required to align everything.

[KiwiAlfa156]

Next little job was straightening a buckled front guard





Not perfect, but ok by me.

[KiwiAlfa156]

Caliper piston kit and headlight arrived (finally). Fitted



The headlight doesn't have a fitting for the park light, but the LED indicators that I have for this bike have running lights, so I'll wire these to the park light out put.



The plan going forward is assemble the rear mudguard/tail light assembly (which I've painted). And refit the wiring loom. Unfortunately the coils look a bit poo, with some unsightly cracks.

[Grimly]

If you're not a slave to originality, fit a pair of MP08 coils from a Honda CBr1000, Glodwing, etc. Dirt cheap, common as muck and dead reliable.
They also have a dead handy feature of having easily replaceable leads.

[KiwiAlfa156]

If you're not a slave to originality, fit a pair of MP08 coils from a Honda CBr1000, Glodwing, etc. Dirt cheap, common as muck and dead reliable.
They also have a dead handy feature of having easily replaceable leads.

Thanks Dave. No this one isn't going to be period perfect. So I'm not too worried about non-OEM bits and bobs.

Carrying on with small things when I get time. Just modified the rear indicator brackets to carry some LED units. Discovered that the cushion spacers for the electrical component mounting plate had gone awol, so made some up out of panel steel. Currently refitting the wiring loom which I've rewrapped in cloth tape. I'll snap some pics of the progress on the roller tomorrow.

[uk gs nut]

Very impressive work, especially the frame straightening. I worked in a truck coachworks and my main work was straightening truck chassis after an accident. Your doing great and waiting on next instalment.
Dennis.