• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

1982 GS450L Tire Options

  • Thread starter Thread starter potato potato
  • Start date Start date
P

potato potato

Guest
OK, please don't flame me as I have searched a lot on this subject.

What kind of tires are you guys running on 450L bikes. I am having a hard time finding a matching set of vintage style tires. I'm not interested in changing out the rear wheel for a 17 at this point either.
 
Stock was 4.60-16 rear, 3.00-19 front (some fiches have a typo showing 3.60 for the tire, but a 3.00 tube). That translates to 120/90-16 and 100/90-19 in modern sizes.

The rear is going to be a little harder to find. The one worthy choice that comes in the correct rear size is the IRC Durotour RS310:
http://www.americanmototire.com/catalog/product_info.php?manufacturers_id=649&products_id=2162
http://www.americanmototire.com/catalog/product_info.php?cPath=33_145_151&products_id=2158


There's also a Kenda in that size, but they are absolutely awful tires -- downright dangerous, in my experience.


Personally, I would not go to a 130/90-16 rear. There are skrillions available, but the wheel is very narrow and the handling will be goofed up because the tire will be squeezed into the wrong profile.
 
A 3.00 19 is 80mm wide, 655mm diameter - or thereabouts, depending. This translates to an 80/90 19 - except that it only seems to exist as a dual sport tire. A 90/90 19 is about as close as it gets being 90mm by 645 high. A 100/90 should be on a 2.15 rim which won't be stock on a 450.

I don't think there's any point in going to a 100/90 front on this bike. For the same reasons not to go to a 130 on the rear.
 
That makes sense, the information I had listed 3.6-19.

Good to know about the Kenda tires, I will avoid those.

Assuming you guys have run 100/90 on the front or should I go with 90/90 as John mentioned?
 
I will agree on avoiding Kenda tires. They are only (marginally) useful to keep the rims off the floor when moving the bike around.
I will not even get on a bike with Kenda, let alone ride it.

Stick with the 90/90 tire on the front. Your wheel is not wide enough to properly support a 100/90.

.
 
OK, I'm leaning towards Avon AM26 Roadrider tires (90/90 Front, 120/80 Rear). I mounted Avons on my Harley and was very impressed.

Anyone running these tires? Assuming I will be OK running tubeless front and rear. I know my front wheel calls for tubeless but cannot remember if that text is on the rear (will check tonight).
 
Good catch on the front, y'all -- 90/90-19 would indeed be best.

You need a 120/90-16 on the rear, not a 120/80-16. The Avons are indeed great tires, but I don't think they're available in 120/90-16.

The parts diagram shows tubes front and rear. However, if the wheels are marked "tubeless tire applicable" then install new tire valves and go tubeless.
 
Last edited:
bwringer said:
Good catch on the front, y'all -- 90/90-19 would indeed be best.

You need a 120/90-16 on the rear, not a 120/80-16. The Avons are indeed great tires, but I don't think they're available in 120/90-16.
Click to expand...

Is the 90 aspect ration needed from a handling perspective? I did not realize that a half inch shorter sidewall would make or break that tire.

The search continues...
 
...you don't necessarily need matching tires do you?...and dare I say it- especially on an L. No I don't have anything against 'em but the look of the bike does not suggest " Isle of Man" criticality to me.
And the back seems to wear out before a front tire anyways.

So I'd just get as close a conversion of the original sizes as I could that had similar front and back tread patterns ....also, Lower aspect tires will be harder to mount on slightly wrong rims( correct mme if I am wrong)...(inch versus metric) especially if you are doing it yourself. PS: recommend buying some proper bead lubricant in the latter case- it's a big help!
 
Last edited:
Good point. I also did not consider difficulty to mount the shorter sidewall.

At this point I will probably go with the IRC Durotour referenced by bwringer.
 
You must log in or register to reply here.
Back
Top