G
groundshock
Guest
Yay! A place for my junk too!
Project started about 3 weeks ago, slowly making progress. Bike is a 82 KZ1100A, 48k on it, and needs lots of attention.
As delivered:
Progress since this picture:
- Stripped all the Vetter garbage off of it (which may turn out to be a mistake since apparently they were Kawasaki/Vetter branded stuff from either the dealer or factory)
- Washed it about seventy times to cut through the 30 years of dirt
- Replaced plugs, wires, caps
- Deoxidized every electrical connector on it
Next up is rebuilding the starter clutch since the last bonehead didn't use Loc-tite on the attaching threads essentially destroying it. After that, it's carb time. Will post more pics.
Project started about 3 weeks ago, slowly making progress. Bike is a 82 KZ1100A, 48k on it, and needs lots of attention.
As delivered:
Progress since this picture:
- Stripped all the Vetter garbage off of it (which may turn out to be a mistake since apparently they were Kawasaki/Vetter branded stuff from either the dealer or factory)
- Washed it about seventy times to cut through the 30 years of dirt
- Replaced plugs, wires, caps
- Deoxidized every electrical connector on it
Next up is rebuilding the starter clutch since the last bonehead didn't use Loc-tite on the attaching threads essentially destroying it. After that, it's carb time. Will post more pics.