1st Gen TSCU LED Relay Mod

[posplayr]

Wow, I knew something was up from the get-go with you.

I have a working 1st Gen TSCU and I wanted to use LED turn signals. Not wanting to reinvent the wheel, I searched for someone else who's done the mod. I didn't find any. Plenty referencing the 2nd gen, but almost nothing for the first. After reading the issues people have had with the 2nd Gen TSCU, I wasn't sure if I would be able to do it and retain the auto-cancel on my bike. A quick look at the wiring diagram, and it looked like I should be able to. So, I decided to write one up for anyone else thinking about doing the mod.

1) You're right, it was not coincidence that I chose the EP34. I compared my stock setup to what the parts store had. This was the easiest replacement. Had nothing to do with your mod.
2) You're right. I had no clue these flashers existed; all electronics flashers I've seen have been 3 or more pins. All of the 2 pin ones I've seen are mechanical.
3) You're right again. They aren't as abundant as the 2nd gen, but there's still people out there with them. Excuse me for wanting to make things a little easier for them and sharing my knowledge.

Maybe I should put a price tag on my knowledge and charge people for it, like you do?

And, BTW, I'm no dummy either. I have plenty of experience in electronics, and this mod was a cake walk for me. I simply wanted to make it easier for those not as knowledgeable as me. I had no intentions of teaching a master wizard like yourself anything.

I will humbly bow-out now, as I am obviously inferior to you. Maybe a mod can come and clean this thread up, or even delete it. You've altered my view of TGSR and I doubt I'll be back here much

If you choose to be mad at me, that is your prerogative.
If you choose to ignore me, that can be easily accomplished.
If you choose to delete this thread, that will be a GSR loss.
If you choose to leave, that will, I'm afraid, be your loss.