Back to bikes

[dorkburger]

Larry, thank you for the kind words. At this point I?m more lucky then good, but try to increase my odds by going out a lot.
morning / evening light is a great time to photograph things. Nice color and less harsh lighting conditions.

Colorado CJ who used to frequent this site regularly was great at photography.

Thanks Ed. It?s hard to see in that pic, but the last two pushrods are bent. I?m thinking blown, parked, scavenged for parts.

 

[Buffalo Bill]

Holidays are over. Time to finish up Mal's GS750. While my wife was at work, I stole her kitchen counter to sand the clear. Started with 800 wet/dry on to 1000, 1500, and finally 2000 grit.

So Larry you did 6-8 coats of clear, then waited 3 weeks before sand and polish?
That's a great result.
Did you use a machine or hand polish?
I polished one guitar by hand a few years ago. My right arm and shoulder felt like it belonged to The Hulk when I stopped.
I've since bought a polisher, but even that takes some time to get right.

 

[nvr2old]

I waited a couple of weeks between Christmas and New Year's to cut and buff the parts, Bill. I have my handy variable speed drill with the polishing pads, wool. yellow foam, and finally black foam finish pad. It's perfect for getting around the tank seams and the front of the tank. I can hold the tail section between my knees for using the drill, too. The top and sides of the tank I use a full-size buffer also with 3 pads. I'd like to get a smaller six inch variable speed buffer for bike parts. Less of a chance of catching an edge on the tank and possibly throwing it across the room.. I've done a lot of guitars, too. Hand polishing is really hard and time consuming and will never bring out the shine the way a power tool can. If you follow the many sand paper stages to take out the previous grit scratches, by the time you get to 2000..it buffs right out beautifully without fighting it. If you go from 800-2000 it will always show scratches no matter how much you buff on it.

 

[allojohn]

Hey Larry, know anyone who needs a boatload of bubble wrap?

 

[allojohn]

As you see I'm not much of a photographer but here's the best I could do to show off Larry's fantastic work.

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

 

[dorkburger]

Beautiful.

 

[Guest]

Beautiful indeed! That is a top notch result, and a mighty fine looking bike!

 

[steve murdoch]

Great looking bike, John.
Like the swingarm/shock combo too.

 

[allojohn]

Beautiful.

Beautiful indeed! That is a top notch result, and a mighty fine looking bike!

Great looking bike, John.
Like the swingarm/shock combo too.

Thanks for the complements gents!

 

[nvr2old]

Just saw that you posted some finish pics, Mal. Wow! I hardly ever get a chance to see parts I've painted back on the bike. That baby turned out nice. You were worried the rest of the bike would look dull compared to the paint, but the end result looks fantastic. What a beauty. Glad to have been a part of it.

 

[allojohn]

Cheers Larry, you were absolutely bang on with the color (pearl & metallic), it looks dead right. I have the biggest smile cruising down the road now. This paint job was always going to be impressive but it has made this bike something truly special. Look out for more photos as the weather warms around here! Again, many thanks to you and I look forward to seeing your next project results.

http://meticulousmotorcyclepainting.com