• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Blipped quickly, bike hesitates at idle

  • Thread starter Thread starter Johnny K
  • Start date Start date
J

Johnny K

Guest
Hey guys, bike is sig. My valves are within .04-.08. My floats are 22.4. My mixture screws are 3.5 turns out. She idles fine if I take it down to 1100 or 900. She bogs when throttling just a tiny bit letting out in first, then a second or two later she's fine with no problems. It seems like if I let out in first and give it about 1/2 or more throttle, she bogs but lightly throttle is fine. Going through each gear there is no hesitation to 10000 and decal in any gear there are no pops at all. If my idle is at 1100 and I blip very quickly to about 1/4 and let go, she will go to 8 or 900 and stay there for about 15 seconds or more almost stalling and then go back to idle. I am going to carb synch, but I just got her running and wanted to see what I could do before I go and synch her. Thanks in advance,
John.
 
Synch her - probably most of your problem. After that play with the mixture screws, sounds like you are a little rich to me. I had similar symptoms on my 1000G with exact same mods you have.

Dan :)
 
salty_monk said:
Synch her - probably most of your problem. After that play with the mixture screws, sounds like you are a little rich to me. I had similar symptoms on my 1000G with exact same mods you have.

Dan :)
Click to expand...

times two, need a little jetting work.
the #1 most frustrating hard to get right thing with bikes is jetting for mods.
 
You must log in or register to reply here.
Back
Top