• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Cam Shaft Chain Tensioner

  • Thread starter Thread starter Steve Long
  • Start date Start date
S

Steve Long

Guest
I have a 1978 GS400.
The cam chain tensioner sometimes vibrates wildly back and forth on the knob.
Is it broken or just in need of adjustment?
How do you adjust it?
Thanks,
Steve
 
it may just be worn out or loose....

if you need a replacement let me know i have one that will work...

send me a pm if interested
 
With the tensioner removed from the cylinder block loosen the lock nut on the left side of the tensioner and back the slotted bolt out ? turn. Turn the knob on the right side of the tensioner, which in the Suzuki service manual is called a lock shaft handle, counterclock-wise. As you are turning the knob counterclock-wise push the pushrod all the way back. Keep turning the knob until it refuses to turn any further.

With the pushrod still pushed in as far as it will go tighten the slotted bolt so that the pushrod will not plunge out.

Remount the tensioner to the cylinder block. If the tensioner is not going in turn the crankshaft clockwise slowly to get slack in the cam chain on the intake side of the block.

Loosen the slotted bolt ? turn allowing the pushrod to advance towards the cam chain. Tighten the lock nut but leave the slotted bolt loose by that ? turn.

While turning the knob counterclock-wise, slowly rotate the crankshaft in reverse direction, counterclock-wise. This causes the chain to push the pushrod back.

Release the knob and slowly turn the crankshaft in the normal direction, clockwise. You should see the knob rotate as the chain becomes progressively tighter. If it does the pushrod is obviously moving forward under spring pressure signifying the tensioner is in good operable condition. If it moves sluggishly or not at all that means the pushrod or the slotted bolt is sticking. If so remove the tensioner from the block again and inspect the pushrod. It could need cleaning or could be bent or galled. Further crank rotation will take the slack out of the cam chain.
 
More info on cam chain tensioners:
http://bwringer.com/gs/camchaintens.html

Yours will look a bit different, but they all function the same.

No one makes a manual cam chain tensioner for the GS400, since they're not a popular drag racing engine... :shock:

Also, sync your carbs.
 
You must log in or register to reply here.
Back
Top