• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Can you fix a leaking intake boot?

  • Thread starter Thread starter goingtothedesert
  • Start date Start date
G

goingtothedesert

Guest
1980 GS550E. One of the intake boots came loose taking the carbs off. Is there some kind of sealant that will hold the rubber part on instead of trying to get those rusted/probibly impossible screws off?

I know taking those screws off will be almost impossible. Only one boot at the engine side came back with the carb a little so I know it will leak a little.


Someone told me high temp silicone will work. Is that true?


Thank you all so much!!!
-Chris
 
i once rigged up my old 450 with stuff called SEAL ALL they sell at walmart. its $2. its mostly a gas tank sealant but it becomes like a hard plastic when its cured. i put it in between the pieces of the intake boot and let it sit for a day. but honestly, its less stressful to just buy a new intake boot for $25.
 
Intake boots cannot be repaired. They must be replaced when they crack or separate.

Silicone products deteriorate within minutes in the presence of gasoline and gasoline vapor. Epoxies become hard and crumble and flake off.

Cough up the dough for new boots so you can forget about them for another 20 years. It's just something every GS rider must do at some point, and the risks of badly damaging your bike's engine are quite real.

Petcocks are another pet peeve of mine -- to avoid spending $50 or $60 on the new petcock every GS needs after 20 years, some people will spend months of frustration and effort and risk severe engine damage. I don't understand this type of magical thinking.

Anyway, replace those intake boots and don't forget the o-rings!
http://bwringer.com/gs/intakeorings.html
 
I'll second that. Don't even attempt to fix them, it's a waste of time.
 
thanks...

thanks...

But for a guy without too many tools any tips on trying to get those bolts off without stripping them? I've never had too much luck getting off stripped bolts or having to drill them out.


Anyway to keep this inexpensive?


Thanks so much... you guys are great.

-Chris Miller
 
goingtothedesert said:
But for a guy without too many tools any tips on trying to get those bolts off without stripping them? I've never had too much luck getting off stripped bolts or having to drill them out.


Anyway to keep this inexpensive?


Thanks so much... you guys are great.

-Chris Miller
Click to expand...

Chris
I removed all 4 boots this Friday. Only got two of the 8 bolts out. Per the advice I read on this column, I went to Advanced Auto Parts and paid $30 and bought a hand impact wrench. I used the biggest phillips head bit I could fit on it, gave it a couple of whacks, and they all came out real easy. I'm talking about 10 minutes to get the remaining 6 out and I had never used one before.
My $.02.

-Rory
 
Good News!!!

Good News!!!

I guess I should try something before I get all worried about it. I put a perfect fitting phillips bit onto my socket wrench and gave it a few good wacks with my hammer so it fit in nice and to "shock" the bolt a little bit.

All of the bolts came off perfectly. No trouble. No stripping, No need for hacksawing, ect... I hope this post helps someone else though. I'm sure someone will have to deal with rusted bolts. Why would they put phillips heads on there instead of Allen bolts? Silly Suzuki...


Thanks for all your help guys. Now I just have to find the best price on those intake boots and try not to let them get screwed up putting the carbs back on.

-Chris
 
You can drill the heads off and remove the boots, then the stump of the bolt usually comes out easily with locking pliers.

You can also cut a slot in the screw heads with a Dremel tool or hacksaw, then use the slot with a straight blade screwdriver bit in your impact driver.

One way or another, they must come out. If it's any consolation, they rarely sieze and break off completely like exhaust bolts.
 
You must log in or register to reply here.
Back
Top