T
Tal/IL
Guest
I got an '82 GS300L for my son's first bike. The PO said he had been riding it the day before, but we couldn't get it to start. He offered to get it going if we wanted to pick it up later, but I offered to take it "as is" for less cash, and we did. After getting it home, we tinkered with it and it would fire and run (not race) for a couple of seconds then die.
I'm not much on carb work, so my neighbor pulled the carbs off and cleaned them for me. After re-installing, we rode it around and decided all it needed was some minor adjustment and we'd be good to go. The next day it would fire right up, but the engine would race for a couple of seconds and. We couldn't keep it running. After a second cleaning of the carbs - dipped and soaked this time - the same thing. It seemed good when reassebled, but engine races and dies the next day.
Any suggestions? We are taking the carbs off for the 3rd time now.
I'm not much on carb work, so my neighbor pulled the carbs off and cleaned them for me. After re-installing, we rode it around and decided all it needed was some minor adjustment and we'd be good to go. The next day it would fire right up, but the engine would race for a couple of seconds and. We couldn't keep it running. After a second cleaning of the carbs - dipped and soaked this time - the same thing. It seemed good when reassebled, but engine races and dies the next day.
Any suggestions? We are taking the carbs off for the 3rd time now.