Craigslist "funnies"

[dorkburger]

Years ago i saw a car tire drag bike riding in traffic on one of our busiest stretches of roads. It blew my mind a little.

 

[dorkburger]

https://southjersey.craigslist.org/mcy/5920185600.html
Neat Honda, but 6k??

 

[wyly]

https://southjersey.craigslist.org/mcy/5920185600.html
Neat Honda, but 6k??

to my eye it looks unrestored which adds to value, but yeah $6.5 k? ...I know where to find a nice '75 CL360 for $4,500 and 72' CB 350 for $3000 and those are in Canadian funds, so 25-30% less in US dollars...maybe you need to be a real fan of those models to be willing to pay that much.

 

[trevor]

https://southjersey.craigslist.org/mcy/5894890826.html

8.0 Second Quarter Mile? - $6500 (Atco

Big block, big tire, turbocharged Suzuki dragbike. Easy 8.0 second quarter mile times. Not streetable, for the dragstrip only.

 

[dorkburger]

That bike has been hanging around CL for at least a year and a half.

 

[dorkburger]

https://southjersey.craigslist.org/mcy/5862588139.html

 

[Big T]

Apparently, he's so bored that he can't be bothered to take a picture of the left side of the bike

 

[Buffalo Bill]

He's bored because, his bike sucks.

 

[wyly]

he may have a lot of time sunk into it but the potential market is gonna be very small...4,5k is waaaay to much for a parts bike...

 

[cowboyup3371]

A 2017 Suzuki that looks like this will surely mean the death knell for the company

http://nashville.craigslist.org/mcy/5918328284.html

Suzuki motorcycle - $400 (Nashville Tennessee)

2017 Suzuki

condition: good
fuel: gas
transmission: manual


QR Code Link to This Post


Suzuki motorcycle

The motor is not locked up

Bought as a project

Don't have the time to fix it

Does not run

$400


Need gone today

Text is the best way to get a hold of me

 

[Burque73]

Boy, they're making those new"retro" looking bikes more and more authentic all the time. The rust even looks real! Like the new jeans you can buy already faded and torn.

 

[Buffalo Bill]

Boy, they're making those new"retro" looking bikes more and more authentic all the time. The rust even looks real! Like the new jeans you can buy already faded and torn.

Those jeans were only cool in the summer for teens. At school and after 18, I was embarrassed to wear them. Nowadays, I hate work pants with a hole in the right knee, a quick way to get cut on the job. :apologetic:

 

[Burque73]

Those jeans were only cool in the summer for teens. At school and after 18, I was embarrassed to wear them. Nowadays, I hate work pants with a hole in the right knee, a quick way to get cut on the job. :apologetic:

Ha, same here in fact I just replaced four pair of jeans with a hole in the right knee. Funny, maybe you found the same Wrangler Riggs with defective right legs! I think maybe a repetitive motion like installing locks on doors with right knee down did mine in.

 

[wyly]

Ha, same here in fact I just replaced four pair of jeans with a hole in the right knee. Funny, maybe you found the same Wrangler Riggs with defective right legs! I think maybe a repetitive motion like installing locks on doors with right knee down did mine in.

knee pads are your friends, bursitis isn't...and you'll go through fewer jeans too

 

[Buffalo Bill]

The last 10 years I been wearing double knee work pants by Dickies. Only $20 and they last a very long time, like 300-600 work days? So long I don't remember buying them.
My right knee's heavily callused, seems everything I work on requires I put a knee down.

 

[trlsrider]

you are so dang interesting even if this is the 3664 time you posted about your little "dickie"

 

[Buffalo Bill]

you are so dang interesting even if this is the 3664 time you posted about your little "dickie"

I have a little troll following me about…

 

[trlsrider]

the sky is falling the sky is falling

 

[Burque73]

This is interesting.

Recycled metal art

https://albuquerque.craigslist.org/mcy/5924361399.html

Only $50

 

[Spyder]

This is interesting.

Recycled metal art

https://albuquerque.craigslist.org/mcy/5924361399.html

Only $50

This is cool, I like it. But Damm, somebody needs to work on their welding skills...