• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Dyna 2000 Troubleshoot

  • Thread starter Thread starter richardhaggarty
  • Start date Start date
R

richardhaggarty

Guest
I have a Dyna 2000 ignition unit hooked to dyna 3.0 ohm coils installed on my '85 GS700. I have run it without problems for about 5K miles. Recently, I started having hard starts and cylinders dropping out while cruising.

I checked the wiring, coils, plugs and plug wires. I just finished installing new coils this morning. No joy.

The crank trigger seems to be accurately reporting the crank position, alternating +12V from each pickup as the crank magnet spins. However, the LED on the ignition module never blinks, indicating the triggers. Also, I get a constant +12V from both coils at all times, and no spark.

I suspect my ignition unit is fried. Any thoughts on this?

Also, how could I go about testing the ignition module?

Thanks
 
Send an email to Dyna I'm sure the have some sort of trouble shooting info
 
richardhaggarty said:
I have a Dyna 2000 ignition unit hooked to dyna 3.0 ohm coils installed on my '85 GS700. I have run it without problems for about 5K miles. Recently, I started having hard starts and cylinders dropping out while cruising.

I checked the wiring, coils, plugs and plug wires. I just finished installing new coils this morning. No joy.

The crank trigger seems to be accurately reporting the crank position, alternating +12V from each pickup as the crank magnet spins. However, the LED on the ignition module never blinks, indicating the triggers. Also, I get a constant +12V from both coils at all times, and no spark.

I suspect my ignition unit is fried. Any thoughts on this?

Also, how could I go about testing the ignition module?

Thanks
Click to expand...

The blinking LED on the Dyna2000 is the self test function for the module/black box. If it does not blink, the box is fried. I have a 2000 unit with the same problem. Dyna will rebuild it for about $200. I havent sent mine in since I had a spare "S" to replace it with.

Earl
 
I would hope Dyna would stand behind their product for more than 5K on the clock.
 
chef1366 said:
I would hope Dyna would stand behind their product for more than 5K on the clock.
Click to expand...

At the time, I contacted Dyna's main office in Ca. I had about 1500 miles on the Dyna 2000 that was installed in my 1150 with Dyna 3 ohm coils. They were not willing to offer any replacement/compensation. I can understand why they would not. If you have a faulty R/R that is overcharging, the voltage level can be high enough to fry the Dyna ignition module. There is no way I can say positively what caused the breakdown. It could be the Dyna was faulty, however, I'm more inclined to believe the charging system had a fault. I had replaced the factory electronic ignition that burned out with the Dyna 2000, which also eventually burned out. With the last replacement (Dyna S ), I replaced the stator, R/R, battery and grounds. No more problems.

If you're burning out Dyna ignitions, my opinion is its likely your fault and not the Dyna. :-)

Earl
 
earlfor said:
At the time, I contacted Dyna's main office in Ca. I had about 1500 miles on the Dyna 2000 that was installed in my 1150 with Dyna 3 ohm coils. They were not willing to offer any replacement/compensation. I can understand why they would not. If you have a faulty R/R that is overcharging, the voltage level can be high enough to fry the Dyna ignition module. There is no way I can say positively what caused the breakdown. It could be the Dyna was faulty, however, I'm more inclined to believe the charging system had a fault. I had replaced the factory electronic ignition that burned out with the Dyna 2000, which also eventually burned out. With the last replacement (Dyna S ), I replaced the stator, R/R, battery and grounds. No more problems.

If you're burning out Dyna ignitions, my opinion is its likely your fault and not the Dyna. :-)

Earl
Click to expand...
Good post Earl.
 
I sent an email to Dyna through there website tech support form:

http://www.dynaonline.com/english/questions.htm

Dyna TekMail responded this way:
...If you find the module or crank trigger to be defective, the replacement charge is only $123.00 for the module, and $67.00 for the crank trigger, unless they are under the 1 year warranty, then the price is $00.00! Testing is also free, in case you are not sure about the condition of the system, just send it in...
Click to expand...
Those prices are more palatable then buying a new new package retail (approx. $300). The free testing is also a nice gesture; whether it is worth it with the shipping costs and time is a whole other issue.

Suspecting my battery early on in this problem I replaced it. Also, I have a new R/R and Stator both from Electrex. I believe I have all my bases covered as far as the charging system goes.

If you're burning out Dyna ignitions, my opinion is its likely your fault and not the Dyna.
Click to expand...
This may be true. I seem to remember while troubleshooting this problem forgetting to connect the ignition module's dedicated ground. I tried to turn it over once or twice before noticing. I suspect may have fried the module.

A new module is on the way. I'll post the results.
 
You must log in or register to reply here.
Back
Top