J
Jackw
Guest
Ok guys, so here's my problem. I have an 83 550 L. I have been working on it over the winter. I set the valves, double checked them again last night and they are all good. did a compression test and all cylinders are between 120-140 PSI. I took apart both carbs, removed slides, which looked fine so I didn't touch them otherwise, and measure the float to make sure it was set properly everything else looked clean so I didn't touch it. So I don't see how the carbs can be my problem. I changed the plugs, checked them last night and they are all firing. Rebuilt the petcock, checked that last night and it's working properly. The bike starts but it has a really bad hesitation. even once I warm it up if I crack the throttle sometimes it shuts off or other times it just hesitates before it revs up. Even when reving it to around 4k it's not running clean. It smells like it flooding itself but it's not smoking.