1980 Suzuki GS850G shaft drive. $1,700. Bought it 12 years ago as a project and did the work described below. Had it running well then lost interest. This bike is a very straight-forward restoration. It needs all fluids changed, a headlight, carbs cleaned, tires and a battery. Bike is an 850 not a 1000. I have the correct 850 side cover emblems.
Gorgeous black paint
Wheels repainted (I have the painted front fender)
Good chrome except for front part of exhaust pipes
Custom Sargent Seat
New clutch and tach cables
Receipts for a ton of factory nickel and dime stuff - gaskets, grommets, screws, o-rings, etc.
New Sonic fork springs, seals and bushings
New Progressive Suspension shocks
New wheel bearings
Rebuilt front and rear master cylinders
Rebuilt front and rear calipers
New pads
New stainless brake lines
Rebuilt carbs - ultrasonically cleaned
New carb intake boots/o-rings
New petcock
New Air filter
Por-15 tank treatment
New Compufire ignition
New ignition caps
New plugs
Valves inspected and adjusted
Extras:
Another set of Progressive Suspension shocks
Another set of Progressive Suspension springs
A set of Koni springs
A truing stand I built when I did bearings and mounted my own tires. The Vetter hard saddle bags and mounting bracket are not included with this sale. If you are interested in them along with the bike, I'd be happy to discuss that with you. I may be able to help with transportation. Thanks
Gorgeous black paint
Wheels repainted (I have the painted front fender)
Good chrome except for front part of exhaust pipes
Custom Sargent Seat
New clutch and tach cables
Receipts for a ton of factory nickel and dime stuff - gaskets, grommets, screws, o-rings, etc.
New Sonic fork springs, seals and bushings
New Progressive Suspension shocks
New wheel bearings
Rebuilt front and rear master cylinders
Rebuilt front and rear calipers
New pads
New stainless brake lines
Rebuilt carbs - ultrasonically cleaned
New carb intake boots/o-rings
New petcock
New Air filter
Por-15 tank treatment
New Compufire ignition
New ignition caps
New plugs
Valves inspected and adjusted
Extras:
Another set of Progressive Suspension shocks
Another set of Progressive Suspension springs
A set of Koni springs
A truing stand I built when I did bearings and mounted my own tires. The Vetter hard saddle bags and mounting bracket are not included with this sale. If you are interested in them along with the bike, I'd be happy to discuss that with you. I may be able to help with transportation. Thanks