• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Front Breaks are ****!

  • Thread starter Thread starter MoMakkawi
  • Start date Start date
M

MoMakkawi

Guest
After nearly colliding into another car yesterday when i went into an emergency stop after some jack!@# cut me off i now know these breaks wont cut it for me . i pulled the front break as hard as i could and its wouldnt slow down fast enough until i forcefully applied the rear which made me start fishtailing.... fortunately i was able to dodge the cars and make it home ( nearly ****ed my self) I need to make the front brakes alot better it is a 1978 gs 750 and my daily rider so my life depends on its ability to brake... Ive read SS lines could help the breaking ability and am looking into getting some, anyone know where a good place to order them are. More so what else could i do to improve braking
 
Replacing the pads with good/modern FF or GG rated pads will help immensely. ;)

Eric
 
7981GS said:
Replacing the pads with good/modern FF or GG rated pads will help immensely. ;)

Eric
Click to expand...

In addition to the stainless. And a rebuild. The stainless lines are less stretchy than the rubber over nylon stock lines. Probably, you can pull the lever all the way to the grip, so a lot of your braking effort is going into stretching the hose. Definitely can't do that with the stainless.

Was your '78 750 one of the single-disk models? Put on a dual disk front end (with master cylinder) and the salty_monk brake upgrade for larger diameter disks and twin-pot calipers.
 
...and some rider improvement.

Stuff happens, I know, but it reads like you weren't fully engaged in the traffic. You didn't anticipate that the other guy was going to do that. Plus, you weren't accounting for the fact that you were on a 34-year-old bike, not a modern crotch-rocket.

And, you locked up the rear tire which not only is WAY less effective than not locking up, but, as you found out, leads to loss of directional control of the vehicle.

PRACTICE until you don't succumb to instinct and tromp that rear into a skid.

The upgrades are desirable, but IMO, there's room for driver improvement in your scenario, too.
 
kirkn said:
...and some rider improvement.

Stuff happens, I know, but it reads like you weren't fully engaged in the traffic. You didn't anticipate that the other guy was going to do that. Plus, you weren't accounting for the fact that you were on a 34-year-old bike, not a modern crotch-rocket.

And, you locked up the rear tire which not only is WAY less effective than not locking up, but, as you found out, leads to loss of directional control of the vehicle.

PRACTICE until you don't succumb to instinct and tromp that rear into a skid.

The upgrades are desirable, but IMO, there's room for driver improvement in your scenario, too.
Click to expand...


This /\ , and a competent rider would find out what kind of shape his brakes are in long before he needed them.

There is really no excuse for not having good brakes, the parts you need are readily available, it's very basic maintenance.
 
Last edited:
Changing the front caliper/s for the later 1100 type with square brake pads utterly transforms the brakes and look almost exactly the same.
I've done this on both my 1000s's
Apart from the swelling hose issue the other problem is with the older round pads is they sit in alliuminium and so corrode, losing a lot'v of power.
 
Anytime I get a an old bike the first thing I do is rebuild the entire brake system. Start by rebuilding the master cylinders with new kits, pull out the caliper pistons, replace the seals, re-grease the pins, remove and flush the bleeder valves, install new braided lines and fresh fluid. Properly bleed them and your brakes should stop better than they did when they were new. I don't even attempt to ride until this is done.
 
I'm not that far from you if you want to see a set of Twinpots installed on a 78 GS1000. I have some bracket kits left.

I have a set of twin brake GS1000 fork legs going spare as well if that helps you out.

You will never get anything approaching a modern setup using stock parts but the 83 1100/750 brakes are the best of the stock ones if the look is important to you.

Dan :)
 
You must log in or register to reply here.
Back
Top