Gs1085 Bhp figures

[koolaid_kid]

Look at the fuel mileage.

 

[Guest]

Your stock 26mm carbs say you have the small port head.. The switch to the later head would get you more along with the carbs

I understand what yer saying about a cv Head but i realy reluctant to pull my head off...
the guy who built my engine has offerd to modify my head at a price...
but i just want to do it the cheapest way and with the least hassle..

 

[salty_monk]

I thought the 1000G cams were revised for more torque. My 1000G was definitely slower than my 1000E... Higher mileage motor too though.

 

[Graham]

I am not positive but you will probably find that these HP , And Torque # no are measured at the crank not the wheel, so if you subtract the average 15-20% the #'s will be right where you would expect them to be

From the Yoshimura article.

All told, the modifications made
by Yoshimura increase the GS1000's
power output to 133.54 bhp at 10,000
rpm and 76.64 ft. lb. of torque at 8000
rpm, rneasured at the countershaft
sprocket on the Yoshimura R&D dyno.
Output readings on one dyno may not
match those achieved on another dyno.
What is important is that the engine
makes more power than its
competition, is plenty fast enough to
win races, is capable of lasting long
enough to reach victory circle.​