• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

gs750 8v crank seal replacment

  • Thread starter Thread starter jwinter272
  • Start date Start date
J

jwinter272

Guest
my 750 is leaking oil from the ignition side crank seal. behind the points. any tips on removing this seal without having to split the cases?
 
Take the old one out with a couple of wood screws and yank it out.
Put the new one in the freezer overnight and grease the outside rim.
Using the bolt that goes in the end of the crank (or a shorter one) stacked with enough large washers to press in the seal.
Make sure it is going in straight or you will cut the casing of the seal.
 
Make sure you don't install the seal backwards. There's a teensy directional arrow on the new seal; make sure it's correct.

If you go with the wood screw route and/or drill pilot holes to remove the seal, be aware there's a large roller bearing pretty close behind the seal. It wouldn't be a very good idea to get shavings or a drill bit in the bearing. Vacuum out any debris.
 
You must log in or register to reply here.
Back
Top