• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Magneto Puller?

  • Thread starter Thread starter Detroit Diesel Man
  • Start date Start date
D

Detroit Diesel Man

Guest
So I ordered a magneto puller from Bike Bandit...did some research before hand and I found the thread size to be 16mm x 1.5 RH I got the puller and its too big and doesnt fit...is their a special size for that? if anyone could direct me to a part# and place to get one through I'd appreciate it..Thanks.

DDM
 
750 uses a smaller size that just happens to be the exact size of the swing arm bolt..
 
750 uses a smaller size that just happens to be the exact size of the swing arm bolt..


I did try that before i ordered the puller...after standing and staring at stuff in my shop for an hour wondering what I could use..problem is the threads are too short so it doesnt press on the crank to pull the mag off..I'll have to bring my thread gauge home from work tomorrow and see exactly what size it is...another set back...thanks for the reply.

DDM
 
Put a 3" long 1/4 drive ratchet extension in the hole and then put the bolt in.
Or a small bolt & washer.. anything to add a little space for the bolt to push on.
 
Put a 3" long 1/4 drive ratchet extension in the hole and then put the bolt in.
Or a small bolt & washer.. anything to add a little space for the bolt to push on.

Yep +1 ^^^

I used an M6 allen bolt (about 3" long) for the rotor on my 450. Tighten the swingarm / axle bolt onto it and tap the end with a hammer. It'll pop off :dancing:
 
Back
Top