• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Master Cylinder

  • Thread starter Thread starter Anonymous
  • Start date Start date
Go ahead and get it for $10 or $15 dollars, not a big investment. A lot of these bikes had interchangeble parts. But just to see for sure check out bike bandit and compare parts numbers for the various parts to see if they're the same. I've done it for fasteners and such for price and availability.Hope this helps.
 
Removing Seized Or Stripped Screws

Removing Seized Or Stripped Screws

Found at http://www.bikeyard.com/techtip29.htm

Removing Seized Or Stripped Screws From The Master Cylinder Covers

Actually they are tiny Philips head bolts, but everyone calls them screws, so that's what we will call them here. Those little screws in the top of the reservoir of your brake or clutch master cylinder are subject to corrosion in their location, and you will often find them seized when you try to remove them to check the brake fluid.

To avoid stripping the slots in the head, make sure you are using a proper sized, good quality screwdriver that fits the head exactly. Put a drop of penetrating oil on each screw and with the right pressure and torque you might get lucky and get them to turn. If they won't budge, an impact driver might be your next step, but there is a chance that the impact could break the cast aluminum housing of the master cylinder.

The best method, short of drilling the screws out, is a simple trick we discovered using an automatic
center punch. This is a little spring-loaded punch that snaps an impact to the punch head when pushed. It is available from most tool suppliers for a few dollars. This trick will work even if the screw heads are stripped.

Place the punch head at the outer edge of the screw and make a small dot. Then add a drop of penetrating
oil, and angle the punch in the direction you want the screw to turn. Try not to chew up the head too badly, and continue snapping the punch in the dot, angled a bit in the right direction, until you see the screw turning. The impact helps the oil penetrate into the corroded threads, and provides a positive turning force on the screw when done correctly.

If that method fails, your next step will be to drill dead center into the screw head until the head falls off.
Don't use too big a drill bit though, you don't want to damage the cover. Once the head comes off, you can remove the master
cylinder cover and usually the screw shaft can be removed with small vice-grips.

All these tips, and many more, can be found in The Motorcycle Handbook along with more complete
explanations on many aspects of motorcycles and motorcycling. 63 illustrated chapters of practical,
down-to-earth information you won?t find anywhere else!
 
mckiver said:
A lot of these bikes had interchangeble parts.
No kidding. At a bike wreckers, I found a front master that was labeled "500 Titan". Looks different, but works fine. While you're at it, throw on some braided steel lines. You'll be glad you did. 8)
 
Back
Top