Pods for a dynojet kit

[Guest]

Hi.
I have taken the decision to buy and install a dynojet kit for my 82 GS650GL. Im currently running pods with +2 on main and +2 on pilot but I feel its far from perfect so ill bite the bullet and buy the stage 3 dynojet kit. In the installation manual, they recommend using the K&N RC-2382 filters but at nearly 200$USD I find thats a lot of money for filters. So my question is: Are there less expensive pods I could buy to use with the kit that will do the job just as well? Thec pods I currently have are cheap Amazon ones so I dont mind getting new ones Thanks!

L.Leblanc
1982 GS650GL

 

[zed1015]

You get what you pay for and you should only use good quality free flowing pods.
Recommended brands are K&N,S&B,APE,UniFilter and Ram Air so i would search those for suitable alternatives.
Using cheap chinese , DNA, EMGO,HI,LEVEL etc and no name brands should be avoided as they can be very restrictive and cause rich running, power loss and increased fuel usage amongst other issues..

 

[Rob S.]

My APE pods were half the cost of K&N, same looks and performance.

 

[Guest]

My APE pods were half the cost of K&N, same looks and performance.

Do you know where I could get some?

 

[salty_monk]

http://gszone.biz/carbs.html


or link from the home page http://www.aperaceparts.com/

 

[Guest]

http://gszone.biz/carbs.html


or link from the home page http://www.aperaceparts.com/

And do they fit all the GS carbs? I dont see the 650 on their list

 

[salty_monk]

I think they fit all the CV carbs but not the VM's. Someone here will be able to tell you if the inlet mouth is the same diameter on both sets (I think yours are 32's and the 1000 are 34's)